Bondtech LGX® Lite Extruder V2 (with extruder motor)

Description: Bondtech LGX® Lite Extruder V2 (with extruder motor) New Features in V2. Do you need already have extruder? Extruder Only Tighter tolerances; improved build quality: sturdier 2 parts housing design; precise stepper motor centering. extra mounting point; increased resistance to heat; micro form factor, featherweight and small footprint; enhanced filament grip; and that Bondtech black Look : ) Includes full size LGX Large Gears, maintenance windows and filament tension lever with 3 presets (open; rigid; flexible). Orders from onwards 4/11/2023 will be V2 version. The Bondtech LGX Lite V2 is a filament feeder based on the LGX® Large Gears eXtruder and uses Bondtech’s new Dual Drive Technology based on larger drive gears. Each LGX Lite V2 extruder is supplied with: 1x LGX Lite V2 feeder; 1x Nema14 Round 20mm pancake stepper motor (mounted on extruder) 1m long lead cable with JST-XH 4-pin connector 1x 2mm Hex Key (recommended tool) 1x Powered By Bondtech sticker Also shipping with additional accessories: 1x Push-fit collar (inserted) 1x 30mm PTFE tube to use in the PTFE Tube Adapter 8x M3 square nuts for reinforcing mounting holes (inserted) 8 features of this Bondtech eXtruder: Larger drive wheels, for increased filament grip; Filament pre-tension lever, for repeated results; Drive wheels’ maintenance windows, for easy cleaning; Compact, light & centered filament path, for increased performance and compatibility; Multiple mounting hole patterns, for easy and flexible setup; Compatible with Nema14 round stepper motors; Craft boxes without bleaching & no coating. 3D Printed Housing using PA12 GF The housing parts are professionally printed with polyamide 12 Glass Filled for maximum strength, precision and higher temperature resistance. To lower our ecological impact we are reducing our use of chemical dyes. This part is supplied with a wax protective coating to lower sensitivity to moisture and grease, while remaining fully functional. Maintenance Guide: https://www.bondtech.se/downloads/MaintenanceGuides/bondtech_EXT01LGX41003-LGX-Lite-V2-Large-Gears-eXtruder_maintenance-guide.pdf Quick Start Guide: https://www.bondtech.se/downloads/QuickStartGuides/bondtech_EXT01LGX41008_LGX-Lite-V2-Large-Gears-eXtruder_quick-start-guide.pdf Bondtech LGX® Lite Extruder V2 (with extruder motor) All Prices include GST. Message us if require a tax invoice. New Features in V2. Do you need already have extruder? Extruder Only Tighter tolerances; improved build quality: sturdier 2 parts housing design; precise stepper motor centering. extra mounting point; increased resistance to heat; micro form factor, featherweight and small footprint; enhanced filament grip; and that Bondtech black Look : ) Includes full size LGX Large Gears, maintenance windows and filament tension lever with 3 presets (open; rigid; flexible). Orders from onwards 4/11/2023 will be V2 version. The Bondtech LGX Lite V2 is a filament feeder based on the LGX® Large Gears eXtruder and uses Bondtech’s new Dual Drive Technology based on larger drive gears. Each LGX Lite V2 extruder is supplied with: 1x LGX Lite V2 feeder; 1x Nema14 Round 20mm pancake stepper motor (mounted on extruder) 1m long lead cable with JST-XH 4-pin connector 1x 2mm Hex Key (recommended tool) 1x Powered By Bondtech sticker Also shipping with additional accessories: 1x Push-fit collar (inserted) 1x 30mm PTFE tube to use in the PTFE Tube Adapter 8x M3 square nuts for reinforcing mounting holes (inserted) 8 features of this Bondtech eXtruder: Larger drive wheels, for increased filament grip; Filament pre-tension lever, for repeated results; Drive wheels’ maintenance windows, for easy cleaning; Compact, light & centered filament path, for increased performance and compatibility; Multiple mounting hole patterns, for easy and flexible setup; Compatible with Nema14 round stepper motors; Craft boxes without bleaching & no coating. 3D Printed Housing using PA12 GF The housing parts are professionally printed with polyamide 12 Glass Filled for maximum strength, precision and higher temperature resistance. To lower our ecological impact we are reducing our use of chemical dyes. This part is supplied with a wax protective coating to lower sensitivity to moisture and grease, while remaining fully functional. Maintenance Guide: https://www.bondtech.se/downloads/MaintenanceGuides/bondtech_EXT01LGX41003-LGX-Lite-V2-Large-Gears-eXtruder_maintenance-guide.pdf Quick Start Guide: https://www.bondtech.se/downloads/QuickStartGuides/bondtech_EXT01LGX41008_LGX-Lite-V2-Large-Gears-eXtruder_quick-start-guide.pdf HAVE A QUESTION OR CONCERN? If you need more information regarding this item, please message us or check on original manfuacturers websites. DREMC STORE back our products and pride ourselves, not only in quality but in genuine products. Please do not hesitate to reach out to us. We stock the largest range of 3D Printer Spares Parts, from Manufacturer such as E3D-Online, Creality, Slice Engineering, Bondtech, Micro Swiss, LDO Motors, Bigtreetech, Trianglelabs to name a few. We are the largest Australia Creality Spare Part Distributors based in Brisbane, we stock over 200 SKUs Creality Printers spares parts. Our website store.dremc.com.au for latest stock list and accurate real time stock counter, no hidden stock levels. Do you need bulk spare parts or DREMC / Polymaker filament discount? Message us now if you require B2B/Educational payment terms. Please check out our feedback to see what others are saying about us. × × × × × Buy now and save! Tell a friend Visit store Watch now Postage info Click the Postage tab above the listing description for more info Click the Postage tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYING VIA PAYPAL/CARD Please refer to eBay Checkout for available payment method. Price include GST. Message us if require a tax invoice. Additional Information No additional information at this time Ask seller a question You might also like BIGTREETECH SKR MINI E3 V3.0 32 Bit Control Board for Ender 3 Series Ender 5 Titanium Alloy Bi-Metal Heatbreaker For ANYCUBIC Mega S / Mega Pro / Vyper Trianglelab CR6 SE Titanium alloy Bi-Metal Heat break For CR-6 SE Ender 3 Neo Genuine E3D - Hemera HeatBreak Heat Break (Stainless Steel or Titanium) Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © DREMC STORE Postage Click the Postage tab above the listing description for more info Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 169.95 AUD

Location: Brisbane, Queensland

End Time: 2024-11-10T14:18:43.000Z

Shipping Cost: 21.69 AUD