Black size M Full Body Armor Plate Carrier MOLLE Vest 3A Kevlarr included

Description: Full Body Armor Plate Carrier Vest IIIA NIJ MOLLE Kevlar included, size M Normal 0 false false false RU X-NONE X-NONE Normal 0 false false false RU X-NONE X-NONE This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor The threat level rating of the vest is IIIa NIJ Manufacturer is Ukrarmor Model "Shark" Bsize: MediumType: Body armor vestReference material of the vest - CorduraThe vest is equipped with MOLLY Color: Black Condition: new The “Shark” vest offers full IIIA ballistic protection, including the back, chest and sides of the torso, as well as shoulders, neck, and groin. The vest’s size is adjusted to the wearer via extra-wide 75mm velcro fasteners at the shoulders and 200mm velcro fasteners at the waist. The vest "Shark" is designed for heavy use, even in hot climates: when the waist fasteners are set slightly loose, the vest balances on the wearer’s torso allowing breathing room between the plate carrier and the wearer’s skin. Loose wearing of the vest is not advisable during combat, but having the option prevents the need for removal of the vest to cool down during non-combat. The front and back of the vest have full-size pockets, exterior to the Kevlar “IIIA Soft Armor”, which are hard armor plate ready. Adding hard armor to the vest would increase its front and rear ballistic rating to III or IV (depending on the plates you choose to add). Hard armor plates are not included in this auction. Independent of the exterior pockets for hard armor plates, the entire surface of the vest, neck and shoulder pads, and groin pad are fitted with custom-cut 3A Kevlar ballistic armor. The Kevlar armor is bendable and lightweight making it an ideal choice for balancing protection and maneuverability. The Kevlar armor is enclosed within the water-resistant fabric of the vest making it suitable for all but the wettest of conditions.The vest "Shark" hat a circular ballistic protection, including the back, chest and a man's sides. Modified version of the model "Corsair M", which conforms to the latest standards. Modular vest "Shark", has an improved ergonomic configuration of the security elements, and also allows to use them depending on the specifics of the tasks and the likely threats. Very convenient and practical in the real world. The modification of the body armor "Corsair M" was developed at the request of the Ministry of Defense of Ukraine taking into account the provided draft tactical and technical conditions. The "Shark" model has been improved already from the point of view of practical field military tests of the previous model. On the entire surface of the bulletproof vest is outfitted with 25mm belt strapping at an alternating interval of 25mm to comply with the MOLLE (MOLLY) standard, on which items of equipment and ammunition can be attached (pockets and gear). All straps lines MOLLE vest have the same color in the color of the vest. Do not light up in the night and do not stand out in daylight. What makes 100% draining the terrain. Belt tape is manufactured according to TU U 13.2-31778043-115: 2015 on polyamide yarn, has maximum breaking loads. The vest "Shark" is a modular system and can completely disassemble. Made of a very robust and high-strength quality Cordura fabric (high-strength polyamide fabric "SCC-36," "TPS-12"). 1. Regulation and the compound vest "Shark" in the shoulder area by means of a double overhead valves, which are attached via Velcro hook and loop fastener element to protect the breast from above and below, which provides an enhanced fixation. At the end of the shoulder edges of the valve mounting the chest sewn belt protection belt that provides quick release items of body armor for the urgent release of the user on their own or with the help of the second persons in the event of an emergency.2. Completion of bulletproof vests "Shark" can be supplemented with hard armor plates (at an additional cost).3. On the inside surface of the cover in the flak vest there is a special voluminous cushioning material, which has channels that allow airflows to cool and remove moisture from the body.4. In the absence of removable side protection, fastening and regulation of the bulletproof vest at the waist is carried out by means of a belt and textile fasteners (Velcro). In the previous version, Fastex were used, but practical use (operation of the vest) showed that the Fastex have a number of drawbacks. In the first they are in the process of operation faster failing than the textile fastener. Secondly, in this place, when the body armor is used for a long time, they rub the body and squeeze the blood streams, which leads to discomfort and numbness. The Velcro textile closure completely eliminates this discomfort.5. The fastening of the left and right axle shafts of the side protection in front has a double fixation with a textile fastener. Side protection is attached to the breast protection cover and is additionally covered with a breast valve. On the edges of the left and right side protection elements, sewn belt tapes for their quick detachment from chest protection. Length of side wings adjustable.6. From the back on the top of the vest is rigidly fixed the evacuation line.7. In the side compartments, also and rigid armor plates can be placed.8. The left and right side elements of the body armor are protected by the MOLLE system from the back, this fastening allows you to adjust the bulletproof vest at the waist. This allows you to wear a vest like in summer on a T-shirt and in winter on a warm volumetric jacket.9. The bulletproof vest is equipped with a removable neck (collar) protection, which consists of two parts.10. In the inner volume of the external chest and back protection pockets are located pockets for placing armor plates from the 2nd to the 6th grade of protection standard of Ukraine or 3A to 4 level protection by USA Standart.11. The groin protection element is fastened with belt strips to the MOLLE slings located on the bottom of the chest cover from the inside.12. The chest valve on the bottom edge has a loop, which ensures its comfortable opening.13. Pockets for armored plates. This version of bulletproof vest provides for two pockets for the front plates. The first size is M (Medium) 25x30 cm / 9,84”x11.81 , the second pockets for plate size is XL "Extra large" 30x35 cm / 11.81”x13.78”. The second pocket is designed for operation with maximum protection, in the absence of soft Kevlar ballistic inserts.14. The vest has 7 rows of MOLLE sling lines, for which you can install all necessary pouches, Mags, pockets for documents, a flashlight, walkie-talkie and other ammunition. All these pouches you can also buy in our Ebay-shop or on request if something you can not find on our page. Detailed Specifications:Kevlar ballistic armor, rated (IIIA) (USA) Front panel;Back (rear) panelRemovable side/lateral protection: surface area - 10 dm2 (1.1 sq-ft), weight - 0,35 ± 0,05kg (0.77lbs)Detachable collar: surface area - 6.0 dm2 (0.65 sq-ft), weight - 0,28 ± 0,05kg (0.62lbs) Removable groin protection: surface area - 7.0 dm2 (0.75 sq-ft), weight - 0,28 ± 0,05kg (0.62lbs) Removable shoulder protection: surface area - 4.0 dm2 (0.43 sq-ft) Every square inch of stitched material is packed with custom fit Kevlar body armor: The vest front, the vest rear, each side of the vest, the detachable shoulders and 2-piece neck collar, and the groin protector.The standard version of the vest consists of 9 elements: The vest front, the vest rear, each side of the vest (left+right), the detachable shoulders and 2-piece neck collar, and the groin protector. For additional cost the body armor can be completed:- armor plates in accordance with the standard of Ukraine (DSTU) or the US standard. The hard armor plates are located in the extra pockets of the body armor vest. * In addition, the vest can be equipped with various pounches and Mags, as well as to increase the range of protective vests, by the following ingredients:- fixing the rifle belt;- protection of the pelvis (coccyx) of the lower rear side;- deltoid axillary lateral zone elements;- camerbands for extra side plates;- extend the platforms. We are manufacturers of these vests.We can manufacture your vest in absolutely any size from XS to 5XL or more. If you need another size, please contact us and we will make you an offer. By buying this vest in any of the available complete sets and color schemes, you get what you see. If you have any questions, please ask, do not hesitate.So welcome to buy my lot. Enjoy your shopping, I still have a lot of other products of military and sporting themes.

Price: 870 USD

Location: Kyiv, default

End Time: 2024-02-29T08:09:52.000Z

Shipping Cost: 60 USD