Baffle Wire Kit for Cessna 182, 180, 185, 188

Description: Stop wasting your time or your A&P's time trying to make baffle wires! Do the math, there are 4 wires needed for most 180/182/185/188s and let's say it take 7 minutes to make a wire. @$120/hr, that is $56 for wires (however they look) and you still have to find the right springs! Most folks just go to the hardware store and find a spring that looks close. Any good A&P knows that the right compression spring will reduce chaffing. Our compression springs are custom made to meet the compression requirements. This baffle wire kit will work on a Cessna 180, Cessna 182, Cessna 185, Cessna 188 with Continental engine. The C182 kit contains 2 each 6" baffle wires - use to make the 0450277-1, 0450277-3, 0450277-201 or 0450277-203 2 each 20" baffle wires - use to make the 0450277-2, 0450277-10, 0450277-202 or 0450277-210 4 each baffle springs Extra 20" wire, just in case... Wire bending template These baffle wires are not TSO or PMA parts. You or your A&P will finish making the baffle wire by cutting the wire to the length needed and using the old wire or the provided template to make the “hook” end. You have assisted in producing the wire making it an owner produced part (FAR 21.9) The wires and springs are made from zinc coated ASTM A-228 music wire. They were tested against OEM Cessna baffle wires and passed our rigidity, bend retention and dead weight testing. The last image shows a tip we received from a customer that did not have any of the old wire to use as a template. They installed the straight wire with the spring as normal. Then they pushed on the head of the wire compressing the spring completely and marked the wire where the hole is. Measuring up a 1/4" they made another mark where they started the bend.

Price: 38 USD

Location: Renton, Washington

End Time: 2024-03-31T17:50:12.000Z

Shipping Cost: 5.95 USD