AVANTONE MIXCUBE-AB 120w Total Classic Black Reference Monitor Pair

Description: MIXCUBE-AB AVANTONE Active Near-Field Monitors Click To View Video The Avantone MixCubes are shielded, full-range mini reference monitors. Their design is inspired by the legacy of the 5C Sound Cubes used in virtually all-major studios for the last 25 years. The Avantone Active Mixcubes are designed to be high-resolution, full-range powered mini-reference monitors for fixed or remote locations. The secondary engineering facet was to create a timeless design that compliments a single full-range transducer. Performance ObjectiveStudios primarily use 2-way & 3-way larger monitors designed to represent a wide range reference viewpoint at higher listening levels. However, in this newly developing age of High Definition Audio, there is still a need to also hear what your mix will sound like when played back over small bass-challenged systems such as televisions, clock radios, computers, car stereos, iPod docking stations, etc. It is important to make mixing judgments based partially on listening to reference monitors that will not impart tonal anomalies caused by crossovers or inferior full range drivers. Particular attention is always paid to the critical mid-range vocal/guitar/keyboard areas. This is where having a full-range monitor without a crossover is truly revealing. Ten months of R&D comparative listening & tweaking went into the voicing of the AVANTONE MixCubes. The result is a very smooth sounding, full range upgrade from the original 5C Sound Cubes. Listening tests reveal that the MixCubes have a smooth, more open, transparent top end response with extended bass while maintaining their basic original character. Cabinet DesignThe original 5C Sound Cubes were made of particleboard covered with a glue-on wood grain contact paper. Avantone chose to use thicker, denser MDF board because of its high rigidity and inherent low-resonance characteristics. They started with a 165mm (6 1/2") sealed cube design with radiused edges. Then they chose an elegant Polyurethane high gloss RETRO-CREAM finish. The originals had either screws or on later models plastic binding posts mounted on a recessed plastic cup. Avantone upgraded to high-end nickel plated, machined solid metal binding posts (Dual banana spacing) mounted on a black anodized milled and silk-screened aluminum terminal plate. Next they added a 7mm thick neoprene pad embedded into the base of the cabinet to serve as a skid-resistant acoustic isolator. Additionally, for creative mounting situations, they recessed an industry standard 5/8-27 mic stand mount into the base. Driver DesignThe originals were a basic 5 stamped frame design. Avantone designed a proprietary 5.25 die cast aluminum frame driver/cone assembly to exceed the performance of the originals. The mounting bezel is then polished for an elegant appearance. The paper cone, chosen for its musical character, is custom designed & crafted using the finest New Zealand pulp with mica fibers added for lighter weight & rigidity. The cloth surround is made in Japan to exacting uniform thickness tolerances. The Top Plate and T-Yoke of driver are made of Sumitomo 1008 low carbon steel enabling the highest modeled flux density in the gap. The magnets are Y- 40 GRADE (MIL-SPEC) yielding a 43oz. High Power-low distortion motor structure. Amplifier DesignAvantone designed the amp module from the ground up to be a true professional-grade amplifier. It incorporates overkill concepts in component selection as well as safety. The result is a no-compromise amp with robust headroom characteristics that will rival the performance of much higher priced studio rack mount amps. ApplicationActive Recording / Mixdown Monitors Features:Input: Combo XLR/ 1/4" TRS, balanced. For unbalanced operation with a TS connector the minus signal is automatically groundedSystem Gain: -30 - +6 dB, detented knobOn/Off Switch: illuminated, turns amplifier on or off. Unit still receives power from transformerAC Input: for use only with Avantone power supplyGround Lift Switch: lifts pin 1 shield at input jackSuggested Placement: When positioning the Avantone Active MixCubes on stands or console bridges it is best to keep them at ear level and slightly angled in towards the engineer. Since they are shielded it is ok to place them near a CRT video monitor or TV without causing any problems. The bottom mic stand mounts will also allow you creative positioning options in unusual studio playback situations.Specifications:System Type: Active (Self-powered) shielded full-range stereo pair Frequency Response: 90Hz - 17kHz (useful musical range)Driver Impedance: Nominal 8 ohmsMax SPL: 104db @ 1 meter = 1%THD (PINK NOISE)Amplifier Type: Class A/BAmplifier Power: 60 watts RMS@ .005% THD (1KHz)Amp Frequency Response: 22Hz-50KHz +0dB/- 3dB (90Hz-50KHz +/-0dB)Noise: S/N -113 dBSensitivity: 0dBu (.775VRMS) input at maximum volume (+6dB) = 104dB SPLDriver: Proprietary design 5.25" cast aluminum frame / paper cone /shieldedCabinet: sealed / 18mm MDF / Dacron acoustical stuffingInputs: XLR & TRS (COMBO JACK) +4/Balanced and -10 unbalancedWeight: 7 lb 5 oz (per speaker)Dimensions: 6 1/2" x 6 1/2" x 6 1/2" (165mm x 165mm x 165mm)SALE: $499.99 FREE S&H in continental US (e-mail for international / offshore USA rates)

Price: 499.99 USD

Location: Palm Coast, Florida

End Time: 2024-11-11T18:09:41.000Z

Shipping Cost: 0 USD