Description: Features: Eye protection design: The panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you and the people around you can also watch laser engraving without wear goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles. Easy to install & solid structure: The all-aluminum alloy anodized structure design makes the machine more durable, and improves the accuracy of engraving. The entire structure has been designed for quick assembly, and the assembly can generally be completed within 10-20 minutes. Upgraded dual compression spot coupling technology: ultra-fine laser focus area is reduced to 0.08*0.06mm, high-density laser can easily cut 20mm light wood, 15mm thick acrylic; can directly engrave mirror stainless steel metal, ceramics, glass, and engraving & cutting speed is 40% higher than the ordinary model, which can be comparable to the effect of the 150W CO₂ laser engraving machine. Upgraded fixed-focus laser: no need to adjust the focus before engraving;The focal spot area of the new laser is only 1/3 of the spot area of other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser. Precise scale lines axis: There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 410x400mm large area engraving interval can meet your various engraving needs. Wide compatibility: The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAC system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. More function: uses an integrated screw rod which makes the movement of the laser more precise and the coupling more durable. Support offline engraving; In the event of an unexpected situation, stop the machine at any time to make the engraving safer. The laser sintering temperature is up to 1200℃ Specification: Model: ATOMSTACK S10 PRO Print Size: Recommend Print Size 410*400mm Carving Objects:Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective Electroplating layer and paint surface layer metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate; Cutting Objects:Cardboard, non-woven fabric, wood board, acrylic, some thin plastic board, sponge; Laser power: 50W Laser output power: 10-11W Wave Length: 445 ± 5nm Engraving accuracy: 0.01mm Focusing method: fixed focus laser, no need to focus Laser protective cover: Protect the users eyes and prevent pets from grabbing the laser spot. Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system. Input Format: NC, BMP, JPG, PNG, DXF, etc. Data transmission method: USB connection. Input Voltage: AC100-240V, 50/60Hz Output Voltage: DC12V, 3A Package Size: 59.5*35*13cm/ 23*13.8*5.1in Package Weight: 5.77kg/12.7lbs Note: ● When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles. ● Please do not touch the laser emitter with your hand, or it may burn your hand. ● Please avoid strong impact on the machine. ● Children under 14 are not allowed to use this product and children over 14 need adult supervision. ● The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser. Packing List: 1 x Tool Kit 4 x Foot Pad Foam 1 x Film 3 x Acrylic Sheet 3 x Wood Chips 10 x Wire Tie 1 x Desiccant 1 x Brush 1 x Clean Cloth 1 x Card Reader 1 x TF Card 1 x Power Adapter 1 x Instruction 1 x Data Line 1 x Touch Screen Components 1 x High-Definition Multimedia Interface Cable 1 x Laser Module 1 x Cutting Pad 1 x X Axis Assembly 1 x Y Axis Left Profile 1 x Y Axis Right Profile 1 x Profile On The Base 1 x Under The Base Profile 3 x Foot Bracket
Price: 393.99 USD
Location: San Bernardino, California
End Time: 2024-02-23T04:36:26.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Wave Length: 445 ± 5nm
Print Size: Recommend Print Size 410*400mm
ASIN: B0BKQCHGP7
MPN: HFU8176937811097LL
Laser protective cover: Protect the user's eyes and prevent pets from grabbing the...
Engraving Method: Laser
Engraving Materials: Wood, bamboo, PCB board, cardboard, glass, plastic, leather, etc.
Data transmission method: USB connection.
Machine Operation: Computer Numerical Control (CNC)
Laser output power: 10-11W
Laser Effect: Equal to 150W CO2 Laser Matchine Effect
Operating Software: LaserGRBL, LightBurn
Input Format: NC, BMP, JPG, PNG, DXF, etc.
Cutting Materials: wood board, acrylic, Cardboard, fabric, plastic board, sponge, etc.
Rated Power: 50W
Operation System: Support Win 10 / Win 8 / Win 7 / XP, MAC OS.
Input Voltage: AC100-240V, 50/60Hz
Material: The all-aluminum alloy anodized structure design makes
Engraving accuracy: 0.01mm
Brand: ATOMSTACK
Type: Engraving Machine
Cutting Depth: 20mm light wood, 15mm thick acrylic
Model: ATOMSTACK S10 PRO
Focusing method: fixed focus laser, no need to focus
Engraving Speed: Engraving & cutting speed is 40% higher than the ordinary model
Package Weight: 5.77kg/12.7lbs
Output Voltage: DC12V, 3A
Package Size: 59.5*35*13cm/ 23*13.8*5.1in
