Description: Angle Seat Valve DN25 DN15/32 BSPP Stainless Pneumatic Air Actuated N/C PTFE/FKM1. DN25 PN25 1" Angle Seat Valve DN25 PN25 BSPP Stainless Steel Pneumatic Air Actuated N/CDescription Widely used in: beer beverage filling equipment machinery, textile printing or bleaching, gas industry pharmaceutical and medical equipment, pharmacy, chemical industry high temperature sterilization, disinfection; foaming machinery, foaming equipment; water pollution treatment. Features & Highlights Install as needed, preferably with the actuator facing up Features: large flow, long life, maintenance free, reliableSpecifications Interface: DN25 Control pressure: 0.3Mpa-1Mpa Body material: 304 stainless steel Pneumatic form: plastic head Spool seal: PTFE Stem seal: PTFE/FKM Piston seal: FKM/NBRApplicable medium: water, neutral gas or liquid, alcohol, oil, organic solvent, water vapor, weak acid or weak alkali solution Medium temperature: PTFE: -10 ° C - +180 ° C Ambient temperature: -10 °C - +60 °C Viscosity: up to 600MM2/s Control medium: air/neutral gas Control pressure range: 0.3-1MPAWhat's Included? 1* DN25 Angle Seat ValveInstallation and removal: 1, Connect the valve to the pipe to ensure that it is in the same direction as the flow and attached to the body (the outside of the body represents the direction of fluid flow, according to the installation);2, please remove the actuator when welding installation;3, threaded or flanged: correct installation;4, Disassembly: Ensure that the pressure has been removed before disassembling the valve; carefully disassemble and properly store the thread and sealing material after removal.5, The torque required for the connection of the valve and the pipeline is large enough. The torque value of the torque is as follows: DN25 to 50Nm6, ensure that the pipeline and no residual interface when installing.7, Make sure there are no leaks before use.2. DN15 1/2" BSPP Stainless Steel Single Acting Air Actuated Angle Seat Valve N/CDescription: The angle seat valve maintains the flow rate and saves space. It uses a single-acting pneumatic actuator with spring safety protection to operate the pilot angle seat valve. Angle seat valves are widely used for a short time and frequent start-ups and have the characteristics of responsive and accurate action. Key Features: ♠ Strong and Durable: The item's body is made of 304 stainless steel, which is relatively strong and stable. It is also not easy to damage or rust under proper use and is very durable. ♠ Integrated Design: This item is an integrated design, which prevents water from leaking. ♠ High Flow: This item is a compact valve body with an angle seat for fast response and is capable of high flow operation. ♠ Multiple Applicable Mediums: This item is suitable for multiple mediums such as water, neutral gas or liquid, alcohol, oil, organic solvent, water vapor, weak acid, or weak alkali solution. ♠ Long Service Life: This angle seat valve is externally pneumatically piloted, which increases service life and prevents maintenance. ♠ High Torque: The torque value required to connect the valve to the pipeline is 40Nm. This allows the angle seat valve to work more efficiently. ♠ Wide Application: It can be used in the automation industry, food-grade milk industry, domestic water, general pipeline to control fluid medium, etc. ♠ Customer Service: We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible. Details: Spring: The angle seat valve has an internal spring device that acts as a safety protection device for the angle seat valve. The spring helps to reset the valve stem after the operation. Seal Ring: The lower stopper of the valve stem is made of a high-quality seal ring, which can ensure that the angle seat valve has a good seal when it is single open. Application: This item is widely used in beer beverage filling equipment machinery, textile printing or bleaching, gas industry pharmaceutical and medical equipment, pharmacy, chemical industry high-temperature sterilization, disinfection; foaming machinery, foaming equipment; water pollution treatment. Specifications: Interface: DN15 Control Pressure: 0.3Mpa-1Mpa Viscosity: Up to 600MM2/s Medium Temperature: PTFE: -10 ° C - +180 ° C Ambient Temperature: -10 °C - +60 °C Body Material: 304 Stainless Steel Pneumatic Form Material: Plastic Head Spool Seal Material: PTFE Stem Seal Material: PTFE/FKM Piston Seal Material: FKM/NBR Control Medium: Air/Neutral Gas Product Size: 85*137*172mm/3.3*5.39*6.77in Net Weight: 0.5kg/1.1 lbs Package Included: 1* DN15 Angle Seat Valve Notes: 1.Please install as needed, but preferably with the actuator facing up. 2.Make sure the pressure is removed before removing the valve. 3.Please make sure the angle seat valve is without leakage before use. 4.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order. 3. DN32 Air Actuated Angle Seat Valve 1-1/4" Single Acting 0.3-1MPA Stainless Steel Parameter: Interface: DN32 Control pressure: 0.3Mpa-1Mpa Body material: 304 stainless steel Pneumatic form: plastic head Spool seal: PTFE Stem seal: PTFE/FKM Piston seal: FKM/NBR Applicable medium: water, neutral gas or liquid, alcohol, oil, organic solvent, water vapor, weak acid or weak alkali solution Medium temperature: PTFE: -10 ° C - +180 ° C Ambient temperature: -10 °C - +60 °C Viscosity: up to 600MM2/s Control medium: air/neutral gas Control pressure range: 0.3-1MPA Installation: Install as needed, preferably with the actuator facing up Features: large flow, long life, maintenance free, reliable Widely used in: beer beverage filling equipment machinery, textile printing or bleaching, gas industry pharmaceutical and medical equipment, pharmacy, chemical industry high temperature sterilization, disinfection; foaming machinery, foaming equipment; water pollution treatment. Installation and removal: 1, Connect the valve to the pipe to ensure that it is in the same direction as the flow and attached to the body (the outside of the body represents the direction of fluid flow, according to the installation); 2, please remove the actuator when welding installation; 3, threaded or flanged: correct installation; 4, Disassembly: Ensure that the pressure has been removed before disassembling the valve; carefully disassemble and properly store the thread and sealing material after removal. 5, The torque required for the connection of the valve and the pipeline is large enough. The torque value of the torque is as follows: DN32 to 150Nm 6, ensure that the pipeline and no residual interface when installing. 7, Make sure there are no leaks before use. Package Included: 1*DN32 Angle Seat Valve PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.On Jul 19, 2024 at 03:27:52 PDT, seller added the following information:
Price: 17 USD
Location: California Chino,NJ Monroe Township
End Time: 2024-08-19T02:59:51.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Shipping Notice: Can not ship to Puerto Rico,Alaska/Hawaii
Brand: Unbranded
MPN: Does Not Apply
Valve Operation: Air-Operated
Suitable Media: Air, Fuel, Oil, Water
Control pressure: Control pressure
Body material: 304 stainless steel
Pneumatic form: plastic head
Spool seal: PTFE
Stem seal: PTFE/FKM
PTFE/FKM: FKM/NBR
Medium temperature: -10 ° C - +180 ° C
Ambient temperature: -10 °C - +60 °C
Viscosity: up to 600MM2/s
Control pressure range: 0.3-1MPA
Available Variations
Color: DN15
Price: 17 USD
Available Quantity: 5
Quantity Sold: 0
Color: DN25
Price: 20 USD
Available Quantity: 2
Quantity Sold: 2
Color: DN32
Price: 35.01 USD
Available Quantity: 0
Quantity Sold: 0