Aluminum Swedged Panhard/Radius Rod 9 Inch

Description: Features a 7/16"-20 RH/LH thread pitch, Tube O.D. measures 3/4", Constructed from round 6061-T6 aluminum and feature a silver finish, Several lengths available to custom fit your application, Swedged ends for more strength Aluminum Swedged Panhard/Radius Rod 9 Inch Sku # 910352-9 Mfr. Part # 910352-9 Condition New Brand Speedway Motors Sold Each Details Info Natural 6061-T6 aluminum tube for clutch and shifter linkage, and other chassis uses Suitable for suspension and steering on Micro Sprint, Mini Sprint, and Lightning Sprint Ends threaded 7/16-20 LH and RH threads for rod ends or clevises of your choice Available in 27 lengths from 9-inches to 39-1/2-inches long, most in half-inch increments Outside diameter of tube is .750-inch (3/4-inch) Thin wall construction with swedged ends offers lighter weight than comparable non-swedged tubes Single rotation will adjust the overall length in or out by approximately 7/64-inch Knurled surface to aid in rotating the tube to make required adjustments Order by actual length measurement required for application Swedged Tubing Provides Similar Strength with Less Weight Weight is the enemy of a race car. Any time you can save weight without reducing integrity or creating an unsafe situation you will benefit. Utilizing aluminum tubing for such things as control arms, Panhard bars, steering linkage, and more are all great ways to not only save weight but allow your suspension and steering to react faster to changes in the track surface, which ultimately keeps your race car’s tires in contact with the racing surface for precise throttle, braking, and steering control that can put you in the winner’s circle. One easy way to save weight is to replace heavy wall steel suspension and steering tubes with thin wall aluminum versions that utilize a swedged end. As aluminum is lighter than steel with similar strength characteristics it is the perfect upgrade to these suspension and steering pieces when sized properly for the application. Weight savings are further realized with the thinner wall dimensions of the aluminum tube versus a comparable steel tube of the same outside diameter. Swedging the ends of the aluminum tubing shrinks the outside diameter down, which thickens the wall of the tubing in the area where threads are created for the heim joint, bushing, or clevis end piece to be installed. This critical area is cold formed, which further strengthens the aluminum tube. Swedged aluminum tubes, on average, are 30 percent lighter than their steel counterparts while meeting the same strength requirements. Multiple Lengths to Fit Any Race Car Application We offer these super strong aluminum threaded tubes for your project in a bare finish. They are constructed from 6061-T6 aluminum with .120-inch wall thickness and available in 27 different lengths from 9-inches to 39-1/2-inches, with most in half-inch increments. These natural finish aluminum tubes are threaded to accept 7/16-20 rod ends, bushings, or clevises with left-hand and right-hand threads. This allows the adjusting sleeve to be mounted between two points of adjustment, such as your shifter and transmission, among other fitment applications. Rotating the threaded tube moves the threaded ends of your choice inward or outward for adjustment. For the 7/16-20 thread ends these aluminum sleeves utilize this equates to roughly 7/64-inch of adjustment for each full rotation of the hollow threaded tube. This allows for precise adjustment of your suspension arms on your Mini, Micro, or Lightning Sprint race car these smaller 3/4-inch aluminum tubes are best used for. Great for Chassis and Suspension Builds for Mini, Micro, and Lightning Sprint Cars Wherever you wish to save weight by using an aluminum adjustable threaded tube in your race car, be it for a steering linkage, chassis support, or elsewhere, it is easy to figure out exactly what you need. Simply measure the center-to-center distance of your two adjustment or mounting points, subtract 3 inches for your rod ends, bushings, or clevises you choose and then order the closest length to that measurement. So, if your final measurement after subtracting the 3 inches for your ends is 18-inches, that is what you will order from the drop-down menu. Installation Tips Tech Tip: When assembling a tube, each heim end adds approximately 1.5" to the overall length (assuming the heim is screwed into the tube half way.) If you have a heim on each end of the tube, the assembly will be approximately three inches longer overall. Specs Material Type Aluminum Sold in Quantity Each Finish Natural Tube O.D. 0.750 Overall Length 9 Thread Pitch 7/16"-20 RH/LH MFG. Part # 910352-9 Reviews Would buy agan Rated by Pennie on July 23, 2021 Summary: For a 600 mini sprint Yes, I recommend this product. I would buy again Rated by E on March 29, 2021 Summary: Great product only downfall there not polished but I took care of that Yes, I recommend this product. These tubes are great. Rated by Leo on October 28, 2020 Summary: I was able to totally replace all the rods on my race car with the Speedway series...so not only do the tubes all look the same, which is fantastic, they are all of the same great quality. The price and sizes avalible meant that I didnt have to machine any of the tubes. Yes, I recommend this product. Perfect for my application Rated by Jack on February 04, 2019 Summary: Great piece Yes, I recommend this product. I would buy this again Rated by Outlaw on August 23, 2018 Summary: Just what I needed Yes, I recommend this product. Related Items / Suggested Parts Standard Steel Heim Joint Rod Ends, 7/16-20 RH Male Standard Steel Heim Joint Rod Ends, 7/16-20 LH Male Precision Carbon Steel RH Male Heim Joint Rod End, 7/16 Inch Precision Carbon Steel LH Male Heim Joint Rod End, 7/16 Inch Aluminum RH Male Heim Joint Rod Ends, 7/16 Inch Aluminum LH Male Heim Joint Rod Ends, 7/16 Inch 16 Piece Spacer Kit, 3/8 Inch 16 Piece Spacer Kit, 7/16 Inch Rod End Supply AML6-7 Alum Rod End 7/16-20 LH Male, 3/8 Hole Rod End Supply AMR6-7 Alum Rod End 7/16-20 Male RH, 3/8 Hole Speedway Micro Sprint Alum. Swedged Radius Rod, 3/4 Inch, 7/16 Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 19.99 USD

Location: Lincoln, Nebraska

End Time: 2024-11-12T01:01:59.000Z

Shipping Cost: 12.99 USD