Aluminum Swedged 3/8-24 Panhard/Radius Rod, 11 in. Length

Description: Made using 3/4" OD x .120" wall thickness round 6061-T6 aluminum to maximize strength while remaining as light as possible, 3/8"-24 internal threads with RH thread in one end and LH in the other allows for length adjustment by spinning the tube, Useful for shifter linkage, spoiler supports, splitter supports, etc. in full size cars, Also used for steering linkage and suspension components on smaller vehicles such as Karts, Quarter Midgets, or Mini-Sprints, Available in lengths from 4" to 38-1/2" Aluminum Swedged 3/8-24 Panhard/Radius Rod, 11 in. Length Sku # 910351-11 Mfr. Part # 910351-11 Condition New Brand Speedway Motors Sold Each Details Info Natural 6061-T6 aluminum tube for clutch and shifter linkage, and other chassis uses Suitable for tie rod, engine accessory bracket adjusters, and more Ends threaded 3/8-24 LH and RH threads for rod ends or clevises of your choice Available in 65 lengths from 4-inches to 38-1/2-inches long, most in half-inch increments Outside diameter of tube is .750-inch (3/4-inch) Thin wall construction with swedged ends offers lighter weight than comparable non-swedged tubes Single rotation will adjust the overall length in or out by approximately 5/64-inch Knurled surface to aid in rotating the tube to make required adjustments Order by actual length measurement required for application Swedged Tubing Provides Similar Strength with Less Weight Weight is the enemy of a race car. Any time you can save weight without reducing integrity or creating an unsafe situation you will benefit. Utilizing aluminum tubing for such things as control arms, Panhard bars, steering linkage, and more are all great ways to not only save weight but allow your suspension and steering to react faster to changes in the track surface, which ultimately keeps your race car’s tires in contact with the racing surface for precise throttle, braking, and steering control that can put you in the winner’s circle. One easy way to save weight is to replace heavy wall steel suspension and steering tubes with thin wall aluminum versions that utilize a swedged end. As aluminum is lighter than steel with similar strength characteristics it is the perfect upgrade to these suspension and steering pieces when sized properly for the application. Weight savings are further realized with the thinner wall dimensions of the aluminum tube versus a comparable steel tube of the same outside diameter. Swedging the ends of the aluminum tubing shrinks the outside diameter down, which thickens the wall of the tubing in the area where threads are created for the heim joint, bushing, or clevis end piece to be installed. This critical area is cold formed, which further strengthens the aluminum tube. Swedged aluminum tubes, on average, are 30 percent lighter than their steel counterparts while meeting the same strength requirements. Multiple Lengths to Fit Any Race Car Application We offer these super strong aluminum threaded tubes for your project in a bare finish. They are constructed from 6061-T6 aluminum with .120-inch wall thickness and available in 65 different lengths from 4-inches to 38-1/2-inches, with most in half-inch increments. These natural finish aluminum tubes are threaded to accept 3/8-24 rod ends, bushings, or clevises with left-hand and right-hand threads. This allows the adjusting sleeve to be mounted between two points of adjustment, such as your shifter and transmission, among other fitment applications. Rotating the threaded tube moves the threaded ends of your choice inward or outward for adjustment. For the 3/8-24 thread ends these aluminum sleeves utilize this equates to roughly 5/64-inch of adjustment for each full rotation of the hollow threaded tube. This allows for precise adjustment of your shifter, throttle linkage, engine accessory brackets, and other items these smaller 3/4-inch aluminum tubes are best used for. Great for Chassis and Suspension Builds for Karts and Quarter Midgets Wherever you wish to save weight by using an aluminum adjustable threaded tube in your race car, be it for a steering linkage, chassis support, or elsewhere, it is easy to figure out exactly what you need. Simply measure the center-to-center distance of your two adjustment or mounting points, subtract 2-1/2-inches for your rod ends, bushings, or clevises you choose and then order the closest length to that measurement. So, if your final measurement after subtracting the 2-1/2-inches for your ends is 18-inches, that is what you will order from the drop-down menu. Installation Tips Tech Tip: When assembling a tube, each heim end adds approximately 1.25" to the overall length (assuming the heim is screwed into the tube half way.) If you have a heim on each end of the tube, the assembly will be approximately 2.5-inches longer overall. Specs Sold in Quantity Each Finish Natural Overall Length 11 Outside Diameter .750 Material Thickness .120 Thread Pitch 3/8"-24 RH/LH MFG. Part # 910351-11 Material Type 6061-T6 Aluminum Tube O.D. .750 Reviews We use these radius rods and count on their quality. Rated by Hammer Motorsports on February 10, 2022 Summary: We use these radius rods and have always found them to be a quality product. They are also affordabley priced. Yes, I recommend this product. I would buy again! Rated by Gary on January 31, 2022 Summary: It holds the alternator on a restored 55 Chevy with an LT1 in it. Yes, I recommend this product. Excellent quality and service from Speedway Motors! Rated by Bobby Rotorhead on January 25, 2022 Summary: The 3/8-24 Aluminum Swedged Rod was used in a 2-place helicopter flight simulator for interconnecting the Cyclic Pitch control levers. Yes, I recommend this product. yes Rated by TM on December 23, 2021 Summary: Using product as a secondary brace for a hidden coil bracket Yes, I recommend this product. Nice piece, made a custom clutch linkage works perfect. Rated by Jeff S on December 13, 2021 Summary: Heim joints and this swedge made a perfect clutch linkage. Z bar to fork. Yes, I recommend this product. Related Items / Suggested Parts Standard Steel Heim Joint Rod Ends, 3/8-24 RH Male Standard Steel Heim Joint Rod Ends, 3/8-24 LH Male Precision Carbon Steel RH Male Heim Joint Rod Ends, 3/8 Inch Precision Carbon Steel LH Male Heim Joint Rod Ends, 3/8 Inch 16 Piece Spacer Kit, 3/8 Inch M&W MWS-16K Manual Mini Sprint Wing Slider Micro Sprint Chassis Steel Tie Rod, 37-1/2 Inch Stallard Swedged 3/4 Inch Black Aluminum Radius Rod, 3/8-24 Thread Aluminum RH Male Heim Joint Rod End, 3/8 Inch Aluminum Heim Joint Rod End, 3/8-24 LH Male Aluminum Jam Nuts, 3/8-24 RH, Pack/6 Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 19.99 USD

Location: Lincoln, Nebraska

End Time: 2025-01-17T12:09:39.000Z

Shipping Cost: 12.99 USD