Adhesive Dispenser Hot Melt Glue Dispensers 0-300??C Gluing Machine 110V

Description: Features： Model: X001 Power: 900W Sol speed: 3KG/HR Solvent capacity: 3KG/HR Maximum viscosity; 10000 CPS Working temperature: 160-180°C Temperature control range: 0-300°C Safety precaution: Always wear safety gloves, goggles, and long-sleeved overalls to avoid burns from hot liquid hot melt adhesive 1. The gas circuit should avoid too much water vapor entering 2. The hot melt adhesive capacity must not exceed seven points of the capacity of the storage bucket. 3.The maximum total air pressure is set to 4KG 4. Before heating the melted glue, the pressure of the storage bucket must be released first.Adhesive Dispenser Hot Melt Glue Dispensers 0-300°C Gluing Machine 110VAdhesive Dispenser Equipment Hot Melt Glue Gluing Machine 0-300°C 900W 10000CPS Hot melt glue dispensers are widely used in: toys (bonding, fixing, wiring, insulation), sealing. Packaging; handbags skin bags; small appliances. Wires. Connectors. Connectors; audio. Photo frame: identification labels; Small paper products are bonded and fixed; small ornaments, crafts, hairpins, water polo, etc.; electronic products are fixed. Adhesive. Insulation; other manual or semi-automatic use of glue is required.Features：Model: X001Power: 900WSol speed: 3KG/HRSolvent capacity: 3KG/HRMaximum viscosity; 10000 CPSWorking temperature: 160-180°CTemperature control range: 0-300°C Safety precaution: Always wear safety gloves, goggles, and long-sleeved overalls to avoid burns from hot liquid hot melt adhesive 1. The gas circuit should avoid too much water vapor entering 2. The hot melt adhesive capacity must not exceed seven points of the capacity of the storage bucket. 3.The maximum total air pressure is set to 4KG 4. Before heating the melted glue, the pressure of the storage bucket must be released first. Preparation for operation 1. Confirm the safety protection measures 2. Check if the machine is 110VAC and there is no fluctuation in the pressure 3. See if the temperature of the plastic bucket is set at about 170 degrees (different hot melt adhesives have different softening points. For specific setting values, refer to the data provided by the hot melt adhesive supplier) 5. Check whether the foot switch is connected and whether any conductive objects have touched the components in the electric control box. 6. Check if the air supply system is basically dry and the air pressure is stable 7. Power on and test the circuit of each part. Boot steps 1. Connect the power and turn the power switch to ON 2. Check if the temperature of the temperature controller is within the above range 3. Check whether the pressure relief is turned in the direction of pressure holding 4. Connect the origin, set the pressure value, and start the operation Shutdown steps 1. Release the foot switch to cut off the main power 2. Disconnect the air pipe, or adjust the pressure regulating valve of the filter cup to 0 NOTE:The product needs to be used with an air compressorPaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.Feature 1Compact Design,Unique AppearanceMPNDoes Not ApplyBrandUnbrandedModelx001Power900WSol speed3KG/HRSolvent capacity3KG/HRMaximum viscosity10000 CPSWorking temperature160-180°CTemperature control range0-300°COn Oct 14, 2024 at 23:43:47 PDT, seller added the following information:

Price: 304.48 USD

Location: Chino, California

End Time: 2024-11-15T07:00:23.000Z

Shipping Cost: 0 USD