8-Inch Self-Adhesive Liner Patch Koi Pond Liner Repair EPDM rubber pond liners.

Description: 8 inch self adhesive liner patch from the pond guy, I finally took my pond down and had these for miner repairs. no longer need, Purchased from the pond guy, they work great, see pond guy reviews on this item, They sell on that site for 9.99 plus shipping. These are unopened. Self−Adhesive BackingUse for Small Tears or HolesGreat to Have on Hand for Emergencies $9.99 The 8" Self-Adhesive Liner Patch is the ultimate solution for swiftly repairing EPDM rubber pond liners. With its instant adhesion, this remarkable patch effortlessly fixes small cuts and punctures, ensuring a seamless restoration—no need to worry about complex tools or time-consuming procedures. Using the 8" Self-Adhesive Liner Patch is a breeze. Prepare the area by cleaning and drying it thoroughly. Then, effortlessly peel off the protective film to reveal the adhesive side. Once exposed, firmly press the patch onto your rubber EPDM liner, and watch the magic unfold as it firmly adheres, providing a secure and long-lasting bond. Engineered specifically to adhere to rubber EPDM liners, this patch guarantees a reliable and durable repair every time. Say goodbye to water leaks, and restore the integrity of your pond liner quickly and effortlessly with the 8" Self-Adhesive Liner Patch. Don't let minor cuts or punctures disrupt the beauty of your pond. Invest in the 8" Self-Adhesive Liner Patch today and experience the convenience, reliability, and peace of mind it brings.How to Apply To use an 8" self-adhesive liner patch, follow these steps: • Find the Leak: Before patching the leak you have to find it. Let your water continue to leak until the water level stabilizes. Your water will stop leaking once it is lower than the hole, so check the first few inches of the liner above the water surface. • Clean the Surface: Start by thoroughly cleaning the area where you plan to apply the patch. Use a primer/surface conditioner and adhesive enhancer like EternaPrime Adhesive & Surface Conditioner to remove any dirt, debris, or grease. Ensure that the surface is completely dry before proceeding. • Peel off the Backing: Gently peel off the protective backing from the Self-Adhesive Liner Patch, exposing the adhesive side. Be careful not to touch the adhesive with your fingers, as oils from your skin can reduce its effectiveness. • Position and Apply: Carefully position the liner patch over the damaged area, aligning it properly. Start from one edge and press firmly, gradually working your way towards the opposite edge. Smooth out any bubbles or wrinkles as you go, ensuring a secure and even bond. Apply firm and even pressure over the entire patch to maximize adhesion. • Finishing Touches: Once the liner patch is applied, go over it again to ensure it is firmly attached and properly sealed. • Allow Time to Cure: Give the patch sufficient time to cure and bond with the surface.

Price: 7.99 USD

Location: Pittsfield, Illinois

End Time: 2024-12-17T16:52:22.000Z

Shipping Cost: 4.99 USD