Description: This is the BMS with best quality, and waterproof for you to assemble your ebike scooter battery using 18650 or 21700 cells. It is 16S for a 60V li-ion battery. You can use many branded cells such as Tesla, LG, SAMSUNG, Panasonic, FST, etc. But please make sure that your cells are with good quality and similar capacity/voltage before assembling. Its discharging current is continuous 40A and peak 165A, with short protection, over charging and over load protection, and balance charging/discharging functions. Assembled battery can be used for motor up to 2400W. Can check our pictures for more specifications (picture 2 has a diagram for wiring). The board's dimension is 2.38*2.85*0.38 inches. Instructions for assembling: First, make your cells (similar capacity/voltage) in parallel and series. Second, solider the B- wire of this BMS to battery negative, together with the black balancing wire. Third, add red balancing wires to each positive of your parallel cells sequentially, one at a time, until the last red balancing wire goes to the battery positive. Fourth, add a wire to battery positive as charging/discharging positive. Last, the charging/discharging negative is from the P- of your BMS. The second picture of our ebay list shows a wiring diagram. Please strictly follow these instructions, because any change of setting can permanently damage it! Can also check out our battery cases from our ebay store to upgrade your project. We ship it everyday using “First Class”. You should receive it within 3 days, if you are in US. It follows eBay’s 30 days return and refund policy.
Price: 27.8 USD
Location: San Diego, California
End Time: 2023-11-10T20:39:18.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: 10%
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: FlattenHill
MPN: Does Not Apply
