4PCS iFlight XING2 1404 Motor 3000kv/3800kv/4600kv 4S For DIY RC Racing FPV Dron

Description: 4PCS (iFlight) XING2 1404 Motor 3000kv/3800kv/4600kv 4S For FPV Drone PRODUCT DESCRIPTIONOur XING series NextGen motors have become popular after the initial release in 2018 and became the new standard onthe market. Was it the curved shape or the internal damping ring to protect the bearing, or was it the higherquality NSK bearings coupled with a higher grade titanium alloy shaft? Weve been copied and compared all theseyears, but now its time to set a new standard again! Were finally ready to announce our predecessor the XING2!The smooth, reliable and powerful XING motors were upgraded and we achieved an even higher standard in ourmanufactory as well as better performance than ever before. New center slotted N52H curved arc magnets wereintroduced to drastically reduce response time of the motor! Maybe the biggest bottleneck of our FPV flightcontroller is the motor due to its translation delay of it braking and accelerating. XING2 motors offer fasterresponse to translate your PID loop quicker and get that locked-in feeling you were always looking for!Due to the high quality materials used and the durable joint of bell and shaft, we were able to reduce the magnetair gap and stator lamination to a minimum. The smaller the air gap is, the lower that reluctance and the higher the magnetic flux (which is the magnetic analog of current) causing more efficiency and higher power!Early 2018 we started to put o-rings on the top of our bearings between motor bell and stator. This acts as anabsorber if your bell or shaft has gone through crashing and keeps the bearing gap tight to reduce all thosevibrations induced by high rpms! It can also reduce the axial impact force just enough to keep your bearings smooth and quiet. All our experience, high quality 7075 bells, O-ring bearing protection and all the other featuresyouve just seen on your original XING series are still inbuilt in a new shape and design!The new MOTOR XIN2 X1404 designed for ultralight toothpick build, that micro drone change FPV in nowadays.Super light 3" builds like these just got much nicer since we got SucceX whoop style all in in one (AIO) withiflight new toothpick style frame you can build the ultralight microdrone.SPECIFICATIONS- Voltage: 2S-4S- KV Option: 3000KV/3800KV/4600KV- Configuration: 9N12P- Stator Diameter: 14mm- Stator Length: 4mm- Shaft Diameter: 1.5mm- No.of Cells(Lipo): 2-4S- Max Continuous current(A): 11.8A- Max Continuous Power(W): 174.6W- Internal resistance: 0.28Ω- Weight: 8.5g(without cable)- Mounting pattern: 9*9-φ2mm- Bearing: 5*2*2.5mm- Wire: 120mm/26AWGPackage included:- 1 x XING2 1404 Motor Unibell (Option:3000KV/3800kV/4600KV)- 8 x M2x7 mounting screws

Price: 65.41 USD

Location: Shenzhen

End Time: 2025-01-15T09:08:42.000Z

Shipping Cost: 0 USD