4-blade Hay Cutter w/Conveyor Belt Straw Grass Corn Pulverizer 220V 400-800kg/h

Description: 4-blade hay cutter with conveyor belt This machine is suitable for cutting various crops such as grass, corn, wheat, peanuts, beans, straw, etc. Processed feed is easier to store. It is an essential machine for farmers, small and medium-sized feed processing plants, and farms; At the same time, this machine can also be used in conjunction with a feed granulator, making it convenient for the feed machine to shape feed into pellets. Product parameter: Product Material： Cast iron spray painting Production efficiency: 400-800KG/H Size of feed inlet (with conveyor belt): 23in*9.8in(58.5cm*25cm) Power: 3KW voltage： 220V Applicable Industries: Farms, Home Use, Retail Feature: This machine is equipped with a widened and thickened feeding port, which is solid and firm. All kinds of grass can be fed easily. It is equipped with a conveyor belt, which can feed automatically, which is more convenient and fast. This machine is equipped with a thick and sturdy bracket, which is more sturdy and durable. This machine is equipped with a voltage display screen for a more intuitive reference to whether the voltage is stable. This machine is equipped with 4 sets of thickened blades, which can easily cut materials. Double-sided blades extend the service life of the blades. This machine is equipped with 4 movable wheels, making it convenient for customers to move and transport. The screw in the black circle can be moved back and forth to adjust the tightness of the conveyor belt. Customers can choose the length of material cutting by themselves, and there are two gears for customers to choose. The gears of the new machine may be tightly engaged (in the initial use of gear shifting, manual rotation of the gears is required after shutting down to assist in switching) This machine is equipped with lock nuts to ensure the locking and sealing of the engine room and improve the safety. This nut must be locked when the machine is working. This machine is equipped with air switch, which is safer and more secure. Precautions for operation： In order to ensure the safety and normal operation of the person and the machine, a special person shall be assigned to be responsible for the storage and use of the machine. The machine shall not be operated without learning this procedure and operation technology and reading the familiar instructions. 1. In addition to commissioning according to the commissioning method, before starting, the machine must be carefully checked to see if there are tools and objects hindering the startup and operation. 2. Before starting the machine, it is necessary to check whether there are sundries in the machine. Except for processing straw, nothing is allowed to be stacked on the feeding table. 3. Check whether the electrical equipment is normal and safe. 4. Check whether the running direction of the main shaft conforms to the direction indicated by the arrow on the casing. If not, immediately adjust and close the power switch to ensure the correct operation of the machine. 5. Run for 2-5 minutes before operation, check whether the rotating speed meets the requirements of the machine, never allow overspeed, and check whether other parts are abnormal. If everything is normal, the feeding can be started, and the feeding cannot be excessive, so as to prevent damage to the supporting power unit and machine parts due to overload operation. 6. Feed crops evenly, not too much, so as not to block the feed inlet. The operator's hand shall not be close to the feeding belt during operation. 7. In case of blockage, stop the machine immediately. After the machine stops stably, open the upper cover, clean the blockage, and then restart. 8. Always pay attention to whether there is abnormal sound during the operation of the machine. Shut down and power off immediately in case of abnormality. 9. There shall be no mortar, sand, stone, iron wire, tool parts or other sundries in the crops to be processed to avoid damage to the machine or accidents. 10. At the end of each shift, the power supply must be cut off after all the crops on the feeding table are fed and no more materials are thrown out at the outlet. 12. When the machine is operating, it is forbidden to stand at the grass outlet to prevent flying objects from hurting the body. 13. Operators are not allowed to wear gloves, sleeves must be fastened, and those with long hair must wear safety helmets. All personnel must leave the rotating plane of belt and rotating parts. Note: 1. In addition to debugging according to the debugging method, the machine must be carefully checked for any tools or objects that hinder startup and operation, and all parts of the machine must be tightened before starting up. 2. Before starting the machine, it is necessary to check whether there are sundries in the machine. Except for processing straw, nothing is allowed to be stacked on the feeding table. 3. Run for 2-5 minutes before operation, check whether the rotating speed meets the requirements of the machine, never allow overspeed, and check whether other parts are abnormal. If everything is normal, the feeding can be started, and the feeding cannot be excessive, so as to prevent damage to the supporting power unit and machine parts due to overload operation. 4. When the machine is operating, it is forbidden to stand at the grass outlet to prevent flying objects from hurting the body. 5. Operators are not allowed to wear gloves, sleeves must be fastened, and those with long hair must wear safety helmets. All personnel must leave the rotating plane of belt and rotating parts. We suggest that high-power machines should be directly connected to the main power supply, as the voltage reaching the machine is stable. If the voltage is unstable and the current exceeds the rated current of the motor, it is easy to burn out the starting capacitor. It is recommended to directly connect to the power supply as much as possible. If the machine is not connected to the power supply, different situations may occur, and the wires are not durable. The wires will gradually burn out over time. Item Number: 1*4-blade hay cutter with conveyor belt (239924) On Sep 14, 2024 at 14:14:02 PDT, seller added the following information:

Price: 1148.55 USD

Location: Rancho Cucamonga, California

End Time: 2024-10-16T15:30:01.000Z

Shipping Cost: 0 USD