3 inch (76mm) ULTIMATE Lift Kit for 1997-2001 Honda CR-V by HRG Offroad

Description: Want a HUGE lift on your 1997-2001 CR-V? Do it right the first time with our ULTIMATE bolt-on kit! Designed to give you as much as 3 inches (76mm) of lift while maintaining the proper axle angle and geometry of suspension components. Works with stock Honda springs and struts. This kit cannot be combined with an existing lift. We can custom tailor a spacer set that will work with OME, Truhart, or similar type of existing lift. Please contact us for details. Note: This kit cannot be used with an existing lift. Results may vary when combined with new aftermarket struts or springs.Please contact us before ordering if you are running OME springs or similar lifts. Fits:1997-2001 Honda CR-V only What’s in the box?4 steel suspension lift spacersengine/transmission spacersfront subframe spacerstrailing arm spacersrear differential spacersrear subframe spacers all necessary hardwareinstallation instructionssticker Tire Sizes Stock 205/70/15 (26.3")+1 205/75/15 (27") +1.25 225/70/15 (27.4") +1.5 215/75/15 (27.7") +2 225/75/15 (28.2") +2.5 235/75/15 (28.8") +3.5 30x9.50R15 (30") FAQ Q: What size tire can I fit on my CRV with this kit?A: You can fit a 235/75/15 with this kit and wheel spacers or low offset wheels. You can fit a 30x9.50-15 with some minor trimming to the plastic fender guards and flattening the pinch weld in the front wheel arch. We do not recommend going above 30" due to the poor gearing that results from the larger diameter tires. Q: How is the amount of lift measured?A: The amount of actual lift is measured from the fender lip to the ground. Q: "Will I need an alignment after installing this kit?"A: Yes, just as if you lowered your car, lifting changes the wheel alignment. It is also recommended to install camber correction kits for lifts greater than 1". Q: "Will lifting my car affect the axles?"A: Sometimes. It depends on the amount of lift and the type of axles you have in your vehicle. Worn original or parts store rebuilt axles are more prone to having issues. This kit is designed to solve the axle issues common to lifting the 97-01 CRV. However, lift heights can vary depending on the condition of the existing suspension and therefore we cannot guarantee there will be no axle issues. For best results, install new axles and do not combine this kit with lift springs or other spacers. Q: "Do I need to replace my suspension bushings when installing a lift kit?"A: It depends on the condition of your existing bushings. We always recommend inspecting your factory bushings and replacing them with urethane bushings such as Energy Suspension if needed. The added benefit of installing urethane bushings is that it allows the suspension to move more freely. We also recommend replacing sway bar end links on 97-01 CRV after 100k as they tend to rattle when going over bumps. Q: "Will lifting my car negatively affect the handling?"A: In most cases, yes. By lifting the suspension you are effectively raising the roll center of the car, which can cause additional body roll. Our lift kits are intended for off-road use where suspension travel and ground clearance are more important. Accessories HRG Offroad Rock lights 6 pc kit RGB Rock Lights Single Colors and RGB color to choose from. Original Osram/Cree A Grade Chips Waterproof: IP68 & IP69KDuPont painting, Aluminum housing 20 INCH SINGLE ROW LED LIGHT BAR 8,560 LUMENS Need a LOT of light for off-road driving but don't want a huge light bar hanging off your car? This slim 20 inch single-row light bar utilizes a combination beam pattern and pumps out an incredible 8,560 lumens! Focused beam can provide light for almost 3600 feet! Professional Installation recommendedFOR OFF-ROAD USE ONLY!MADE IN U.S.A.

Price: 499 USD

Location: Mooresville, North Carolina

End Time: 2024-09-10T16:04:25.000Z

Shipping Cost: 0 USD