2023 AURSINC TinySA Ultra Spectrum Analyzer 4inch

Description: [UPGRADED SPECTRUM ANALYZER] Developed by Hugen, Tinysa Ultra installed with NEW HW V0.4.5.1, with 4.0 inch 480*320 large touchscreen display, 100kHz to 5.3GHz widely measure range. And with the new ESD protection function, the tinysa has a higher anti-static level and a longer service life. Built-in 32GB micro SD card, solving the on-site data storage issue, convenient for data sharing and storage [WIDELY FREQUENCY RANGE] Compared to the tinysa (100kHz to 960MHz), the Tiny sa ULTRA has an ultra measuring frequency range of 100kHz to 5.3GHz, spectrum analyzer for 100kHz-800MHz and Ultra mode up to 6GHz. Switchable resolution bandpass filters from 200Hz to 850kHz, you could fast and accurate execute measurement tests. Color display showing max 450 points providing gapless covering up to the full frequency range [2 IN 1 DEVICE] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 100kHZ-800MHz, UHF square wave output between 800mHz-4.4GHz, Mixing signal output is between 4.4GHz-5.4GHz. Built-in calibration signal generator that is used for automatic self test and low input calibration [PC CONTROL] This tinysa ultra can connect to a PC via USB, Tinysa-APP directly transfers data to the computer. The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel [200Hz-850kHz RBW] RBW frequency from 200hz to 850khz which can be set to match the measurement requirements, meet SBB two-tone test requirements and fast scanning. The RBW is as low as 200Hz, which can effectively distinguish adjacent signals and meet the requirements of SSB dual-satellite inter-modulation test. Input Step attenuator from 0dB to 31dB (can not be used not in combination with LNA) [200Hz-850kHz RBW] RBW frequency from 200hz to 850khz which can be set to match the measurement requirements, meet SBB two-tone test requirements and fast scanning. The RBW is as low as 200Hz, which can effectively distinguish adjacent signals and meet the requirements of SSB dual-satellite inter-modulation test. Input Step attenuator from 0dB to 31dB (can not be used not in combination with LNA) [WHAT YOU GET] 1x Tinysa ULTRA Spectrum Analyzer (built-in 3000mah rechargeable battery); 1x 32GB Micro SD card (plugged in the host); 2x 30cm ALSR100 SMA cables; 1 x USB Type-C data cable; 1x SMA-SMA barrel connector; 1x TLanyard and touch plectrum; 1x Antenna with SMA connector; 1x stylus pen. We are committed to providing reliable after-sales service, ensuring that you can make your purchase with confidence

Price: 350.25 USD

Location: Brentwood, New York

End Time: 2024-10-26T19:40:06.000Z

Shipping Cost: 0 USD