2004-2005 CBR1000RR JT Z3 525 GOLD SUPERSPROX 15/43t EQA CHAIN AND SPROCKETS KIT

Description: 2004-2005 HONDA CBR1000RR Complete Performance 525 Chain & Supersprox Sprocket KitJT Racing's Highest Tensile Strength 525 X-Ring Z3 Chain Impressively rated for up to 1200cc Horsepower with 10,670 ft.# tensile strength!! (Compare to premium D.I.D. ZVMX 525 at 10,400 ft.# and RK GXW 525 at 9,300 ft.#) Available with this kit: Quick Acceleration 16/43t (oem/+2t) -or- Quicker Acceleration 15/42t (-1t/+1t) -or- Extreme Acceleration 15/43t (-1t/+2t) Unless otherwise specified, Extreme Quick Acceleration 15/43t sizes listed below will be sent; JT 15 (-1t) tooth Front & 43 (+2t) tooth Supersprox Black Steel Rear Sprocket (JT scm420 Chromoly Japan steel front and Supersprox Stealth Gold Anodized Aluminum Carrier with Black Steel teeth rear) and the new GOLD JT Z3 525x116L (Estimated Length!) "Ultimate Strength" 10,670 ft.# tensile strength X-Ring Racing chain. Also available in optional gear ratios ...at no extra charge! Call RPE Motorcycle to special order! **Please specify at checkout in the "ADD MESSAGE" tab if Optional gearing if desired Unless otherwise specified, Chain & sprockets are sent in Extreme Quick Acceleration sizes with and a RIVET type master link. NO CLIP TYPE MASTER LINK IS AVAILABLE FOR THIS HIGH STRENGTH RACING CHAIN For Reference, Original Equipment stock sizes as supplied from Honda ;2004-2005 HONDA CBR1000RR OEM size is 530x114 x-ring chain, 16t Ft. Sprocket, 41t Rear Sprocket2006-2007 HONDA CBR1000RR OEM size is 530x114 x-ring chain, 16t Ft. Sprocket, 42t Rear Sprocket2008-2015 HONDA CBR1000RR OEM size is 530x116 x-ring chain, 16t Ft. Sprocket, 42t Rear Sprocket QUICK ACCELERATION 16/43t (oem/+2t) gear ratio kit (a little quicker off the line, easier roll on's), 16t (oem) and 43t (+2t). *Your top gear cruising rpm's will be a bit higher, and your top speed will be a tad lower with this quick acceleration kit.Request Quick Acceleration 16/43t sprocket sizes during check out in the "Add Message" tab Even QUICKER ACCELERATION 15/42t (-1t/oem) gear ratio kit (even quicker off the line, quicker roll on's, easier wheelies), 15t (-1t) and 42t (oem). *Your top gear cruising rpm's will be higher, and your top speed will be lower with this quick acceleration kit.Request Quick Acceleration 15/42t sprocket sizes during check out in the "Add Message" tab *** EXTREME QUICK ACCELERATION GEARING IS THE DEFAULT GEAR RATIO SETUP FOR THIS KIT *** Teeth and Sizes Explained...** A -1t front sprocket change is EXACTLY the same ratio change as +3t rear sprocket change.** A -2t front sprocket change is EXACTLY the same ratio change as +6t rear sprocket change (Very Extreme change)** A -1t front and +2t rear combination is EXACTLY the same as a +5t rear only change with stock front sprocket. ** A 525 size chain is approx. 2mm narrower than a 530 chain, and A 520 SIZE CHAIN 4mm narrower than a 530 chain. Less mass equals lighter weight equals easier to spin, but the ratio (teeth size) change makes the big difference. The sprocket width matches the chain width where it rides on the sprockets, thus a 520 chain must use 520 sprockets, and a 525 chain must use 525 sprockets, etc... ** RPE Motorcycle has chain and sprocket conversion kits available in 520 , 525 , and 530 sizes for most motorcycles. ** A larger rear sprocket number of teeth size requires a longer chain, however +1 or -1 tooth on the front sprocket only will use the same chain length Available Optional Sprocket Sizes.....JT Ft. Sprocket also available in 525 x 15 or 16 teethSupersprox Black Steel Rr. Sprocket available in 525 x 42t or 43 teeth RPE Motorcycle does NOT drop ship our products from a far away warehouse! RPE Chain and Sprockets Kits are shipped to you directly from RPE Motorcycle. Orders of advertised products will ship the same day or next day from date payment is made. (Custom order kits or special order colors will take longer*) Also available by special order; Optional Color Stealth Sprockets Gold/BlackOptional colors NOT included in this advertised kit price. OPTIONAL COLORS COST $75 MORE All 525 Z3 chains include a RIVET type master link (Additional Rivet links are $10.95usd) ( NO Optional clip type link is available for this JT Z3 high strength racing chain) Also available from RPE Motorcycle... Tool is NOT included with Chain and Sprockets Kit ( This Optional accessory costs $79.95) Pro Chain Tool Kit $79.95 when purchased with a chain & sprockets kit! (including shipping)Complete chain tool for most 520, 525 and 530 standard and o-ring chainsBreak, press and rivet your chain with one compact toolWill rivet hollow nose master links (will not rivet solid soft-nose pins)Will push pin completely through link/side plateHardened body, riveting tip and breaker pin for strength and durabilityRemovable handle for compact storagePerfect for trail/road tool pack if you have a chain with a rivet master link RPE Motorcycle 10725 Beverly Blvd, Whittier, CA 90601 Hours: Monday-Friday = 10-6pm (Pacific Std. Time) Full Service, Parts, and Accessory Store for all street motorcycles Will calls, and Installation appointments welcome ! we accept Visa, Master Charge, Discover, American Express *FREE Shipping to USA only... including ... Hawaii, Alaska, VI , Guam, and Puerto Rico... ***** INTERNATIONAL BUYERS.... PLEASE LEAVE YOUR PHONE NUMBER FOR SHIPPING DOCUMENTS!! DELIVERED to AUSTRALIA in 7 days! Same $$ or less to the World, time varies depending on your customs dept.. JT & Supersprox Sprockets, the leading edge technology in production and materials with total dedication to excellence gives you the ultimate motorcycle sprocket and chain range at unbeatable value. Our mission is to supply you the most innovative and competitive product line fully backed by complete availability and service. Your Absolute Satisfaction is our Commitment with JT & Supersprox - World's top manufacturers of aftermarket motorcycle chain and sprockets, constantly raising the industry's standards in performance, longevity and reliability Half the Power Loss (Compared with Normal O-Ring X-Ring construction reduces friction by twisting between the side plates instead of being squashed. Normal O-Rings and other makers’ modified O-Rings have squashed points that increase friction. The X-Ring disperses the pressure and minimizes power loss. 1.5 to 2 TImes Longer Wear Resistance (Compared with Normal O-Ring) The X-Ring’s six contact points greatly increase its sealing performance. This keeps the dirt out and the lubrication in much better than any other O-Ring. XW-Rings have the greatest wear resistance of any other type of O-Ring or Non-O-Ring chain Half the Power Loss (Compared with Normal O-Ring) X-Ring construction reduces friction by twisting between the side plates instead of being squashed. Normal O-Rings and other makers’ modified O-Rings have squashed points that increase friction. The twisting action of the X-Ring disperses the pressure and minimizes power loss. 1.5 to 2 TImes Longer Wear Resistance (Compared with Normal O-Ring) The X-Ring’s four contact points greatly increase its sealing performance. This keeps the dirt out and the lubrication in much better than any other O-Ring. X-Rings have the greatest wear resistance of any other type of O-Ring or Non-O-Ring chain . Why JT?JT Sprockets is the world's leading manufacturer of aftermarket sprockets and chain, constantly raising the industry's standards for quality and service. We are committed to supplying the most durable, best quality drive components available in the marketplace worldwide. This is why we produce and sell more sprockets than all the other aftermarket brands combined.Raw MaterialsJT sprockets are made using only the best available materials. Aviation-grade 7075-T6 aluminium alloy for lightweight competition sprockets,SCM415 chromoly steel alloy for front sprockets, and we are the only sprocket manufacturer using the ultra-durable high carbon C49 steel for rear sprockets.ProductionThe JT Sprockets factory is the largest and most advanced in the world. It is fully equipped with high accuracy machinery, including the latest generation of CNC computer design and computer controlled metal cutting equipment.The essence of a high quality sprocket is in the high precision of manufacturing and the inherent quality of the material. Through accurate machining,JT ensures maximum durability and performance.JT Sprockets are manufactured the right way – by hobbing, machining and drilling. This is the only proven way to achieve the closest of tolerances and the most accurate teeth profiles.Heat treated and hand finished to perfection, all JT sprockets meet or exceed the highest possible quality standards set for the motorcycle industry.Quality ControlEvery sprocket goes through up to 25 production stages and 10 individual quality control checks before it is ready to leave the factory and the production facility has achieved the highest European quality standards

Price: 174.95 USD

Location: Whittier, California

End Time: 2024-11-07T18:27:13.000Z

Shipping Cost: 0 USD