2-piece Hartk Stealthburner Toolhead PCB by LDO Motors

Description: 2-piece Hartk Stealthburner Toolhead PCB by LDO Motors This comes completely assembled with no need for soldering anything on the PCB. This is the board that is included with newer LDO Trident and V2.4 kits The second PCB plugs into the main PCB, specifically made to connect your 4010/5015 fan and LEDs by soldering to the PCB. It is intended as an additional convenience piece. The Stealthburner PCB is based on hartk's two piece toolhead PCB design. The design consists of: The main toolhead PCB - which installs into the wiring enclose in the side of the Clockwork 2 extruder. The fan adapter PCB - which installs onto the back of the 5015 fan in the Stealthburner main body. While the LDO stealthburner PCB uses the same PCB outline as the hartk's design, it uses a different circuit design. The LDO version is designed to be completely compatible with the original LDO breakout PCB (see below) while requiring only a small number of cable modifications for those upgrading from the old LDO afterburner PCB. Pinout: Main Toolhead PCB The table below briefly describes the purpose of each port located on the toolhead PCB. PCB Label Name Connector Description HE0 Hotend Heater E0508 Ferrule Port for hotend heater cartridge. TH0 Hotend Thermistor JST-XH-2P Thermistor port for hotend XES X Endstop JST-XH-2P X endstop port. Only used in Switchwire builds, unused in V2 and Trident. PROBE Probe JST-XH-3P Probe port. Accepts 24V inductive probes, also compatible with klicky probes. E-STEP E Stepper Motor JST-XH-4P Extruder stepper motor port CT Chamber Thermistor JST-XH-2P Connects to an external thermistor for more accurate chamber temperature readings. Fan Adapter Header 2x8 M-Header Plugs into the female header on the Fan Adapter PCB Toolhead Cable Microfit3-14P This port connects to the 14pin toolhead cable. Neopixel Cable Microfit3-2P This port connects to the 2pin neopixel cable. Pinout: Fan Adapter PCB The table below briefly describes the purpose of each port located on the toolhead PCB. PCB Label Name Connector Description HEF+/A1/HEF- Hotend Fan* JST-PH-3P Fan port for cooling the hotend heatsink. 24V/5V selectable, defaults to 24V. PCF+/A2/PCF- Part Cooling Fan* JST-PH-3P Port for part cooling fan. 24V/5V selectable, defaults to 24V. 5V/GND/LED Neopixel JST-PH-3P For connecting to the neopixel chain on the stealthburner. Toolhead Cable 2x8 F-Header Plugs into the male header on the main toolhead PCB *The hotend fan and part fan can be independently changed to 5V in two steps: Severe the 24V connection by cutting the trace between the 24V pad and V_HEF/V_PCF pad Make a soldered bridge connection between the 5V pad and V_HEF/V_PCF pad More information can be found here. 2-piece Hartk Stealthburner Toolhead PCB by LDO Motors This comes completely assembled with no need for soldering anything on the PCB. This is the board that is included with newer LDO Trident and V2.4 kits The second PCB plugs into the main PCB, specifically made to connect your 4010/5015 fan and LEDs by soldering to the PCB. It is intended as an additional convenience piece. The Stealthburner PCB is based on hartk's two piece toolhead PCB design. The design consists of: The main toolhead PCB - which installs into the wiring enclose in the side of the Clockwork 2 extruder. The fan adapter PCB - which installs onto the back of the 5015 fan in the Stealthburner main body. While the LDO stealthburner PCB uses the same PCB outline as the hartk's design, it uses a different circuit design. The LDO version is designed to be completely compatible with the original LDO breakout PCB (see below) while requiring only a small number of cable modifications for those upgrading from the old LDO afterburner PCB. Pinout: Main Toolhead PCB The table below briefly describes the purpose of each port located on the toolhead PCB. PCB Label Name Connector Description HE0 Hotend Heater E0508 Ferrule Port for hotend heater cartridge. TH0 Hotend Thermistor JST-XH-2P Thermistor port for hotend XES X Endstop JST-XH-2P X endstop port. Only uséd in Switchwire builds, unuséd in V2 and Trident. PROBE Probe JST-XH-3P Probe port. Accepts 24V inductive probes, also compatible with klicky probes. E-STEP E Stepper Motor JST-XH-4P Extruder stepper motor port CT Chamber Thermistor JST-XH-2P Connects to an external thermistor for more accurate chamber temperature readings. Fan Adapter Header 2x8 M-Header Plugs into the female header on the Fan Adapter PCB Toolhead Cable Microfit3-14P This port connects to the 14pin toolhead cable. Neopixel Cable Microfit3-2P This port connects to the 2pin neopixel cable. Pinout: Fan Adapter PCB The table below briefly describes the purpose of each port located on the toolhead PCB. PCB Label Name Connector Description HEF+/A1/HEF- Hotend Fan* JST-PH-3P Fan port for cooling the hotend heatsink. 24V/5V selectable, defaults to 24V. PCF+/A2/PCF- Part Cooling Fan* JST-PH-3P Port for part cooling fan. 24V/5V selectable, defaults to 24V. 5V/GND/LED Neopixel JST-PH-3P For connecting to the neopixel chain on the stealthburner. Toolhead Cable 2x8 F-Header Plugs into the male header on the main toolhead PCB *The hotend fan and part fan can be independently changed to 5V in two steps: Severe the 24V connection by cutting the trace between the 24V pad and V_HEF/V_PCF pad Make a soldered bridge connection between the 5V pad and V_HEF/V_PCF pad More information can be found here. × Buy now and save! Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Our items are available for pick-up. Pick up procedure is as follows: Purchase the item through eBay Email us to coordinate pickup PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like LDO Motors MGN9H-1R-300/350/400 Linear Rails with Carriages Voron Hall Effect X/Y Endstop PCB Assembled LDO Motors 42STH48-2504AH NEMA 17 Stepper Motor - High Performance High Temperat AC Heated Bed PCB Fully Assembled Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © West3D Printing Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Seller will pay for return shipping. eBay integration by

Price: 28.61 USD

Location: Beaverton, Oregon

End Time: 2024-02-10T21:10:42.000Z

Shipping Cost: 4.1 USD