2 Pcs VALVE COVER GASKETS FITS KOHLER 700 series with STAMPED STEEL VALVE COVER

Description: Replaces Kohler Valve Rocker Cover Gaskets For Metal Covers2 GasketsKohler uses Two Types of Rocker Valve Covers. 1. One Type of Cover is Made of Plastic and uses a O-Ring To Seal the cover. (These Gaskets Will Not Work). 2. Type Two is a Metal Stamped Steel Cover using RTV Sealant as the Gasket. These Gaskets Work On This Type! You can use ATV Sealant with these Gaskets or Without ATV Sealant, the choice is yours as it will seal either way. Torque Value1. Make sure Rocker Cover and block is clean: and that the Rocker Cover is not warped. 2. Gaskets can be beaded thinly on both sides with RTV sealant if wanted. Apply a 1.5 mm (1/16 in.) bead of sealant (you can use Gaskets with or without sealant) to valve cover. 3. Position covers on cylinder heads. If a pulse style fuel pump is used valve cover with pulse fitting hole must be installed on side 2. Install screws in each cover and finger tighten. 3. Torque valve cover fasteners to 6.2 N·m (55 in. lb.),using a diagonal tightening sequence (Tighten top left screw then to bottom right screw. Top right screw down to bottom left screw.) 4. Do not exceed the torque value. Color may vary Excellent for sealing. Gasoline, oil resistant Made in the USA. Aftermarket Shipping Information:Shipped First Class mail and does not include a tracking number in order to save you money. Postal rates for packages have increased dramatically. If you feel you need a USPS tracking number then contact us for a quote but normally it is in the $4.50 range depending on your location.Most all gasket sellers that have low cost shipping ship without tracking numbers. We do reserve the right to place any buyer on the blocked bidder/buyer list.Contact us prior to opening a case with ebay. Ebay derates sellers that have cases even though it is the USPS at fault.

Price: 5.99 USD

Location: Ionia, Iowa

End Time: 2024-08-20T18:43:48.000Z

Shipping Cost: 0 USD