Description: Our powdercoated steel strut spacers are designed to work with your factory Honda suspension. Complete kit includes: set of 4 spacers (2 front & 2 rear), hardware and detailed illustrated installation instructions. These spacers do not require the disassembly of the strut. Please see our other listings for more lift kits and parts.Fits2003-2007 Honda AccordKit Includes4 lift spacersall hardware neededdetailed illustrated installation instructions FAQQ: Why are you claiming 2 inches of lift when the spacers are only 1.5 inches tall?A: On cars with multi link suspension, the strut does not bolt directly to the wheel or to a solid axle like a pickup truck, it bolts to an arm. The geometry of the suspension causes the actual amount of lift to be greater than the height of the spacers. (see photos) Q: How is the amount of lift measured?A: The amount of actual lift is measured from the fender lip to the ground. Q: "Will I need an alignment after installing this kit?"A: Yes, just as if you lowered your car, lifting changes the wheel alignment. It is also recommended to install camber correction kits for lifts greater than 1". Q: "Will lifting my car affect the axles?"A: Sometimes. It depends on the amount of lift and the type of axles you have in your vehicle. Parts store rebuilt axles are more prone to having issues. In general, installing lift spacers GREATER than 1.5" on the front of your Honda will require a subframe drop or "body lift" to maintain proper axle angle. Q: "Do I need to replace my suspension bushings when installing a lift kit?"A: It depends on the condition of your existing bushings. We always recommend inspecting your factory bushings and replacing them with urethane bushings such as Energy Suspension if needed. The added benefit of installing urethane bushings is that it allows the suspension to move more freely. Q: "Will lifting my car negatively affect the handling?"A: In most cases, yes. By lifting the suspension you are effectively raising the roll center of the car, which can cause additional body roll. Our lift kits are intended for off-road use where suspension travel and ground clearance are more important. Want to lift a 1995-1998 Honda Odyssey? Here is the solution for you! Our 1.5 inch (38mm) spacer kit gives you an actual lift of approximately 2 inches (51mm).Accessories HRG Offroad Rock lights 6 pc kit RGB Rock Lights Single Colors and RGB color to choose from. Original Osram/Cree A Grade Chips Waterproof: IP68 & IP69KDuPont painting, Aluminum housing 20 INCH SINGLE ROW LED LIGHT BAR 8,560 LUMENS Need a LOT of light for off-road driving but don't want a huge light bar hanging off your car? This slim 20 inch single-row light bar utilizes a combination beam pattern and pumps out an incredible 8,560 lumens! Focused beam can provide light for almost 3600 feet!Lifetime WarrantyOur steel parts are powder coated for a durable, attractive finish and use new grade 10.9 hardware.All vehicles are different and lift height can vary due to the condition of the suspension before installing the kit. These numbers are averages from real world measurements before and after the kit, and should only be used as general guidelinesProfessional Installation recommended.FOR OFF-ROAD USE ONLY!MADE IN U.S.A.
Price: 189 USD
Location: Mooresville, North Carolina
End Time: 2024-12-06T20:30:05.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Country/Region of Manufacture: United States
Lift Height: 2 inches Front & Rear
Adjustable: No
Manufacturer Part Number: HRG-ACC9802LK2.0
Part Type: Suspension Lift Kit
Included Hardware: Mounting Hardware
Placement on Vehicle: Front, Rear
Brand: HRG Engineering
Fitment Type: Performance/Custom
Warranty: Lifetime
