1993-1997 Ford Ranger Fog Light Bracket Alternative

Description: Normal 0 false false false EN-US X-NONE X-NONE Items NOT included with purchase: Bumper Valance Fog Light Housings Fog Light wiringTwo- Part Epoxy Installation Steps NOTE: It is recommended to test fit your light mounts on the valance before proceeding. 1. Measure and mark the center of the notched area on the bumper valance above each fog light. 2. (Optional) Scuff the outside of each fog light opening and coat the first half-inch with a plastic compatible two-part epoxy to enhance bond. NOTE: Each fog light mount is labeled L (Left/Driver) and R (Right/Passenger) on the back of the mount. 3. Place the bumper valance face down on a solid surface and push the headlight housing mounts onto the valance starting at the bottom and ensuring the center notch on the mount is in the 12’oclock position. 4. After Ensuring the mount is fully seated and centered, install and tighten the three supplied screws on each side. 5. Install your choice of fog light housings using the provided bolts and spacers. Installation Complete

Price: 65 USD

Location: Waskom, Texas

End Time: 2024-09-24T18:29:40.000Z

Shipping Cost: 0 USD