19 Mm Harmonic Balancer Socket & 50Mm Crankshaft Crank

Description: 【50MM Crankshaft Pulley Removal Tool 】-- Used to maintain the harmonic damper pulley position while removing/installing the pulley bolt on many Acura and Honda engine.Using 50MM Crankshaft Pulley Removal Tool -- Use with square socket driver. >1/2" square drive use with breaker bar. Hole in center of tool - allows access to removal of crank shaft bolt.【19 MM Harmonic Balancer Socket 】--The hex socket is used with an impact wrench to loosen the crankshaft bolt It can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applicationsUsing 19MM Harmonic Balancer Socket -- Use with 1/2" drive.Designed with more than three times the standard socket mass to direct more energy to removing the bolt.Satisfaction Guarantee: If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days, guarantee with 12 months’ warranty. Product Description 19mm Harmonic Balancer Socket- Remove Crank Bolt 19mm Crank Bolt Socket This 19mm crank bolt socket is used to easily and quickly remove the crank pulley bolt with an impact gun, Compatible with Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. Upgrade Version Provide more energy to remove the crank bolt for design with more than 3 times the standard socket mass to direct.Inside hexagonal socket design, anti-skid, and impact-resistant, 1/2" square drive Removing the Crank Pulley Bolt When you loosen the crankshaft bolt with an impact wrench, you will NOT need a crank pulley wrench, because the crankshaft bolt loosens counterclockwise, and any engine rotation movement during impact will be in the direction of normal engine rotation. Crank Pulley Wrench Holder- Tighten Crank Bolt 50mm Crank Pulley Holding Tool With offset design for removing/installing many crank bolts for Acura and Honda engine.This crank pulley tool holds the harmonic damper pulley from rotating, when tightening the pulley bolt. Specially designed with 50mm outer hex to fit the crankshaft pulley. Used with a 1/2" square drive tool with a regular socket when putting the bolt back on and tighten to specification torque. Used with 1/2" drive breaker bar Tightening the Crank Pulley Bolt This crank pulley tool is used to hold the crankshaft still, always rotating the crankshaft counterclockwise while finally torquing the crankshaft balancer bolt. You will need a standard socket with this holding tool for properly tightening the crank bolt.The center opening hole is not fit the socket in this tool kit. For Honda Crank Pulley Tool Kit

Price: 28.99 USD

Location: Denver, Colorado

End Time: 2024-09-24T11:04:39.000Z

Shipping Cost: 0 USD