18590-2092 Macerator Pump, Self Priming, Run Dry Protection, Waste Evacuation, 1

Description: Menu Other Items Feedbacks About Us Contact Us Add To Favorites 18590-2092 Macerator Pump, Self Priming, Run Dry Protection, Waste Evacuation, 12 Volts DC DC macerator waste pump for emptying marine holding tanks, ideal for use when not in a discharge restricted are, also suitable for fish box and livewell receptaclesSelf priming to 5 feet this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutesDuty cycle of pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operationIncludes Run-Dry Protection Device that shuts-off pumpPermanent magnet type motor, fully enclosed with stainless steel shaft The ideal solution for emptying marine holding tanks when not in a discharge restricted area. It is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage.FISH BOX AND LIVEWELL TANK EVACUATION The Jabsco Macerator Pump is the ideal pump for the emptying of fish box and livewell receptacles. Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank. If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties. Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline. Again the Jabsco Macerator pump has the characteristics that lend themselves to this application. The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed buy the Jabsco Macerator Pump, and the self priming capabilities are perfect for fish box installations common to many of today's sports fishing boats.SpecificationsImpeller: Jabsco Nitrile compoundMacerator: Stainless Steel Cutter reduces particle size to 1/8" (3mm) maximum, new 4 blade designSeal: Lip TypePort(s) Inlet - 1-1/2" (38mm) Hose Barb and 1-1/2" N.P.T. (Male) Outlet - 1" (19mm) Hose BarbMotor Type Permanent Magnet Type, Fully Enclosed, with Stainless Steel Shaft. Includes Run-Dry Protection Device that shuts-off pump. Powder coated housing with sealed end-bells and bearingsComplies with USCG Regulation 183.410 and ISO 8846 MARINE for Ignition ProtectionWeight 2.3 (kg), 5 lbs Item Specification Item model number 18590-2092 Item Package Quantity 1 Style Fixed Pattern Name Pump Power Source Corded Electric Part Number 18590-2092 Color Black Pattern Pump Product Dimensions 5"L x 5"W x 13"H Material Plastic Batteries Required? No Included Components 18590-2092 Run-Dry Macerator Waste Pump - 12V Item Weight 5 Pounds Maximum Flow Rate 4 Centiliters Per Second Batteries Included? No Voltage 12 Volts Global Trade Identification Number 00671880532990, 00671880564373 Size 12 Volt Is Discontinued By Manufacturer No Dimensions Shipping Returns Additional Info Product Dimensions: 5.0 "h x 5.0 "h x 13.0 "h. Weight: 5.0 lb Fast shipping is very important for us. Our standard shipping service is FREE. Your order will be shipped within 1-3 business days upon full payment received. Most items are delivered within 3-5 business days, however, please allow 3-10 business days. We are shipping only to USA. We only ship to the confirmed Paypal address. We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. We offer a 30 day return policy from checkout winning date. Your satisfaction is guaranteed! If for any reason you are unhappy with your item, just return it within 30 days for a full refund, minus shipping cost. Please contact us prior to initiating a return so that we can issue you a refund authorization. Items defective upon receipt must be packaged in their retail packaging as if new and returned with a detailed description of the problem. Return shipping fees are not refundable. We reserve the right to decline any returns if the above guidelines are not followed. All of our items, unless otherwise stated, will only run on 120 volts. Please check to make sure your country complies with these specifications. If you have a problem or question regarding your transaction please contact us before leaving any type of feedback. We will work with you to resolve any problem you may have.

Price: 250.99 USD

Location: Staten Island, New York

End Time: 2024-11-12T14:56:44.000Z

Shipping Cost: 0 USD

Product Images

Item Specifics

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Return policy details:

Brand: Does not apply

Type: Does not apply

Item model number: 18590-2092

Item Package Quantity: 1

Style: Fixed

Pattern Name: Pump

Power Source: Corded Electric

Part Number: 18590-2092

Color: Black

Pattern: Pump

Product Dimensions: 5"L x 5"W x 13"H

Material: Plastic

Batteries Required?: No

Included Components: 18590-2092 Run-Dry Macerator Waste Pump - 12V

Item Weight: 5 Pounds

Maximum Flow Rate: 4 Centiliters Per Second

Batteries Included?: No

Voltage: 12 Volts

Global Trade Identification Number: 00671880532990, 00671880564373

Size: 12 Volt

Is Discontinued By Manufacturer: No