Leviton

1/2" Pneumatic Steam Valve DN15 Angle Seat Valve 304 Stainless Steel

Description: Package Included: 1*DN15 Angle Seat Valve Parameter: Interface: DN15 Control pressure: 0.3Mpa-1Mpa Body material: 304 stainless steel Pneumatic form: plastic head Spool seal: PTFE Stem seal: PTFE/FKM Piston seal: FKM/NBR Applicable medium: water, neutral gas or liquid, alcohol, oil, organic solvent, water vapor, weak acid or weak alkali solution Medium temperature: PTFE: -10 ° C - +180 ° C Ambient temperature: -10 °C - +60 °C Viscosity: up to 600MM2/s Control medium: air/neutral gas Control pressure range: 0.3-1MPA Installation: Install as needed, preferably with the actuator facing up Features: large flow, long life, maintenance free, reliable 1/2" Pneumatic Steam Valve DN15 Angle Seat Valve 304 Stainless SteelPneumatic Steam Valve Angle Seat Valve DN15 1/2" Stainless Steel 0.3-1MPA Parameter: Interface: DN15 Control pressure: 0.3Mpa-1Mpa Body material: 304 stainless steel Pneumatic form: plastic head Spool seal: PTFE Stem seal: PTFE/FKM Piston seal: FKM/NBR Applicable medium: water, neutral gas or liquid, alcohol, oil, organic solvent, water vapor, weak acid or weak alkali solution Medium temperature: PTFE: -10 ° C - +180 ° C Ambient temperature: -10 °C - +60 °C Viscosity: up to 600MM2/s Control medium: air/neutral gas Control pressure range: 0.3-1MPA Installation: Install as needed, preferably with the actuator facing up Features: large flow, long life, maintenance free, reliable Widely used in: beer beverage filling equipment machinery, textile printing or bleaching, gas industry pharmaceutical and medical equipment, pharmacy, chemical industry high temperature sterilization, disinfection; foaming machinery, foaming equipment; water pollution treatment. Installation and removal: 1. Connect the valve to the pipe to ensure that it is in the same direction as the flow and attached to the body (the outside of the body represents the direction of fluid flow, according to the installation); 2. Please remove the actuator when welding installation; 3. Threaded or flanged: correct installation; 4. Disassembly: Ensure that the pressure has been removed before disassembling the valve; carefully disassemble and properly store the thread and sealing material after removal. 5. The torque required for the connection of the valve and the pipeline is large enough. The torque value of the torque is as follows: DN15 to 40Nm 6. Ensure that the pipeline and no residual interface when installing. 7. Make sure there are no leaks before use. Package Included: 1*DN15 Angle Seat Valve PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.Features:US StockFeatures 3FAST SHIPPINGItem locationCA /NJ /AustellShipping NoticeCan not ship to Puerto Rico,Alaska/HawaiiInterfaceDN15Control pressureControl pressureBody material304 stainless steelPneumatic formplastic headSpool sealPTFEStem sealPTFE/FKMPTFE/FKMFKM/NBRMedium temperature-10 ° C - +180 ° CAmbient temperature-10 °C - +60 °CViscosityup to 600MM2/sControl pressure range0.3-1MPABrandUnbrandedMPNDoes Not ApplyValve OperationAir-OperatedSuitable MediaAir, Fuel, Oil, WaterUPCDoes Not ApplyOn Nov 3, 2024 at 17:24:00 PST, seller added the following information:

Price: 15.38 USD

Location: Chino, California

End Time: 2024-12-24T04:00:19.000Z

Shipping Cost: 3.62 USD

Product Images

1/2" Pneumatic Steam Valve DN15 Angle Seat Valve 304 Stainless Steel1/2" Pneumatic Steam Valve DN15 Angle Seat Valve 304 Stainless Steel1/2" Pneumatic Steam Valve DN15 Angle Seat Valve 304 Stainless Steel1/2" Pneumatic Steam Valve DN15 Angle Seat Valve 304 Stainless Steel1/2" Pneumatic Steam Valve DN15 Angle Seat Valve 304 Stainless Steel1/2" Pneumatic Steam Valve DN15 Angle Seat Valve 304 Stainless Steel1/2" Pneumatic Steam Valve DN15 Angle Seat Valve 304 Stainless Steel1/2" Pneumatic Steam Valve DN15 Angle Seat Valve 304 Stainless Steel

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Features:: US Stock

Features 3: FAST SHIPPING

Item location: CA /NJ /Austell

Shipping Notice: Can not ship to Puerto Rico,Alaska/Hawaii

Interface: DN15

Control pressure: Control pressure

Body material: 304 stainless steel

Pneumatic form: plastic head

Spool seal: PTFE

Stem seal: PTFE/FKM

PTFE/FKM: FKM/NBR

Medium temperature: -10 ° C - +180 ° C

Ambient temperature: -10 °C - +60 °C

Viscosity: up to 600MM2/s

Control pressure range: 0.3-1MPA

Brand: Unbranded

MPN: Does Not Apply

Valve Operation: Air-Operated

Suitable Media: Air, Fuel, Oil, Water

UPC: Does Not Apply

Recommended

Pittsburgh Steelers NFL Football Sticker Decal S31
Pittsburgh Steelers NFL Football Sticker Decal S31

$2.70

View Details
Bills Patch Iron on or sew on  embroidery 2"
Bills Patch Iron on or sew on embroidery 2"

$5.00

View Details
✨️ Monopoly GO Golden Blitz 4th November⚡️FAST DELIVERY🔥
✨️ Monopoly GO Golden Blitz 4th November⚡️FAST DELIVERY🔥

$3.50

View Details
Pittsburgh Steelers Embroidered 3" Iron On Patch
Pittsburgh Steelers Embroidered 3" Iron On Patch

$3.30

View Details
Green Bay Packers Embroidered 3 3/8" Iron On Patch
Green Bay Packers Embroidered 3 3/8" Iron On Patch

$3.40

View Details
Monopoly Go All 1&2&3stars stickers❗read description❗
Monopoly Go All 1&2&3stars stickers❗read description❗

$1.35

View Details
Tungsten Swim Jig Heads
Tungsten Swim Jig Heads

$2.65

View Details
Detroit Lions NFL Football Sticker Decal S602
Detroit Lions NFL Football Sticker Decal S602

$1.95

View Details
Fender 60's Jaguar Waterslide Guitar Headstock Decals (Set of 3)
Fender 60's Jaguar Waterslide Guitar Headstock Decals (Set of 3)

$9.70

View Details
RAW Classic 1 1/4 Cones Unbranded | Bulk Box | 1000 Pack
RAW Classic 1 1/4 Cones Unbranded | Bulk Box | 1000 Pack

$102.99

View Details