1/1400 Goddard-class Star Trek Repair Ship 3d-Printed Resin Model

Description: The Goddard Class tug is a Federation Starfleet deep space tug & repair starship in service in the mid to late 24th century. It was designed to quickly travel out to disabled starships in order to facilitate deep space repairs for ships unable to make it back to a drydock under their own power. Repairs even as complex as warp nacelle replacement could be done in the field with this mobile repair vessel, and the ship, though small, was powerful enough to take even Galaxy-class starships under tow at low warp if need be. The Goddard class was designed by Enterprise-D creator Andy Probert, and has been seen in artwork online and in the Ships Of The Line calendar. This is a highly detailed but simple 3-piece 3d printed resin model. The ship is just over 7 inches in length at 1/1400 scale, and will be a beautiful addition to your 1400 fleet alongside the Round2 Enterprise-D or E plastic models. No decals are included with this kit. Model is unpainted and unassembled. *A note about 3d printed resin models: All 3d models will have small "bumps" from the printing support structure that you will need to sand off; this is best achieved with simple padded nail sanding files or modeler's sanding sticks. The 3d printed resin models I sell are washed in 99% IPA and cured under UV light before shipping, but you may want to allow them to sit in the sun or under a UV source for 5 minutes or so for final post curing if you feel there is any tackiness to the resin surface (there shouldn't be). All resin models, regardless of design, should be washed with a mild abrasive such as Comet or Barkeepers friend before priming and painting.*

Price: 50 USD

Location: Boynton Beach, Florida

End Time: 2024-11-16T14:47:19.000Z

Shipping Cost: 0 USD