110V 7Cfm @115Psi 1PH Portable Vertical Tank Electric Air Compressor 20-Gallon

Description: Product Specifications Drive method: Motor Driven Power / HP：1.5Kw/2Hp Max. Pressure / Psi: 115Psi Air Flow / Cfm: 7 Cfm NO.OF CYL： 2 Air receiver/Tank : 20Gal Brand:HPDMC Model：Vertical Tank Electric Air Compressor Inspect Compressor, engine, pump and equipment looking for damaged, loose, and missing parts before set up and starting. If any problems are found, do not use equipment until fixed properly. Note: At the beginning of the day’s first use of the Air Compressor, check for air leaks by applying soapy water to connections while the Air Compressor is pumping and after pressure cut-out. Look for air bubbles. If air bubbles are present at connections, tighten connections. Do not use the air compressor unless all connections are air tight. The extra air leaking out will cause the compressor to operate too often, increasing wear on the compressor. Before starting the Compressor a. Follow the Set Up Instructions in the equipment manual to prepare the equipment. b. Follow the Set Up Instructions in the Engine manual to prepare the engine. c. Inspect all components of the setup. Make sure all nuts and bolts are tight. d. Fill the Compressor Pump with compressor oil following the Maintenance Instructions in this manual. WARNING TO PREVENT SERIOUS INJURY FROM ACCIDENTAL STARTING: Turn the Power Switch of the equipment to its “OFF” position, release tank air pressure, wait for the engine to cool, and disconnect the spark plug cap before performing any inspection, maintenance, or cleaning procedures. TO PREVENT SERIOUS INJURY FROM EQUIPMENT FAILURE: Do not use damaged equipment. If abnormal noise, vibration, or excess smoking occurs, have the problem corrected before further use. Follow all service instructions in this manual. The engine may fail critically if not serviced properly. Many maintenance procedures, including any not detailed in this manual, will need to be performed by a qualified technician for safety. If you have any doubts about your ability to safely service the equipment or engine, have a qualified technician service the equipment instead. Compressor Pump Oil Maintenance Check oil periodically for clarity. Replace oil if it appears milky or if debris is present, or every 6 months, or 100 hours of runtime, whichever comes first. In harsh environments such as high heat or high humidity, you will need to replace the oil more frequently. Change the compressor oil after the first hour of use to remove any debris. Multiple Applications The air compressor pump is widely used for chemical industry, light industry, textile, food processing, health, electronics, machinery, mining, construction, scientific research and other requirements of high-quality compressed air sector.Ideally suitable for variable air demand from low to medium volumes, also providing either direct driven from the motor or belt driven via pulleys from the motor

Price: 699 USD

Location: Azusa, California

End Time: 2023-12-26T09:05:52.000Z

Shipping Cost: 120 USD