0320042 320042 NLA Evinrude Johnson Water Intake Screen 1975-88 40 50 60 HP 2cyl

Description: Exact replacement water intake screen for OEM part number 320042. Brand new part not listed anywhere, better than the original. Designed from scratch in the good 'ol USA. I designed this based off the original but improved on the weak points. 1 year warrantee no questions asked so long as stupidity wasn't involved or excessively bad waters. It would be obvious to both you and I if I look at it. Snaps in same as orignal, but better construction and stronger so it is easier to remove without breaking if ever needed. The original OEM models break when you try to remove them. I improved the original design so they are less prone to breakage both during normal service and when you need to remove them. Use surgical clamps to install and remove for the easiest process. You can buy these at harbor frieght, pep boys, o'reillys, etc. Good tool to have in general and costs about $10.00. You may need a flat head screw driver to depress the 'tabs' on your old intake screen during removal. Use the surgical clamps to grab it on the center piece/meat, and use the screw driver to depress the retainer tabs installed on your existing retainer screen. You'll have to yank it out like a dentist yanking a tooth (seriously). Fits Evinrude Johnson 40-60 HP 2 Cylinder outboards from 1975-1988. Common wear and tear parts even in freshwater, but will clog up your cooling system quickly and cause a motor overheat. This does not work on the 50-70hp 3 CYLINDER models made in the mid 1990’s. Made by Riverside Marine Products, LLC Please check for compatibility with your motor on your own, I can not help you with that. Parts must be in unused condition or returns will not be accepted.

Price: 50 USD

Location: Manchester, New Hampshire

End Time: 2023-10-21T20:35:52.000Z

Shipping Cost: 10.4 USD