0-30V 0-10A DC Power Supply Lab Variable Adjustable Regulated Bench Switching

Description: 0-30V 0-10A DC Power Supply Lab Variable Adjustable Regulated Bench Switching DescriptionPS-3010DF 30V 10A110VDC Power Supply Thank you for your trust in our Power Products. After purchasing, please read the instructionscarefully and keep them in a safe place for better use. Features: Low ripple voltage, with high precision and high stability This power supply is DF model DC regulated power supply. The output voltage and current are continuously adjustable. 4-digit LED display, display output voltage, current and output power, and provide common 5V voltage USB interface. The power supply is small in size, high in efficiency, moderate in weight. Can be used for a long time under full power conditions, and the continuous operation failure rate is low. The power supply has various protection functions such as over temperature, overload, current limit, etc., and users can use it with confidence. For research, colleges, factories and other occasions, it is your best choice. The basic parameters:l Voltage: 110V US plugl Adjustable voltage: 0-30Vl Current: 0-10Al Display: 4 LEDl Accuracy: ±0.1%±1 digit Technical parameters: Rated working conditions and dimensions:l Input voltage: 110V, 60Hz, manual switchingl Working environment: Temperature: -10 ° C ~ 40 ° C l Relative humidity: <80%l Storage conditions: Temperature: -20 ° C ~ 80 ° C l Relative humidity: <70%l Dimensions: 285x128x145mm Power supply effect:l CV≤0.1%+10mVl CC≤0.1%+10mAl Load effect:l CV≤0.1%+5mVl CC≤0.1%+10mV Ripple and noise:l CV≤20mV r.m.s.l CC≤20mA r.m.s. Display mode accuracy:l 4 digit LED digital display, display accuracy ±0.1% ± 1 word Operation: 1, Note: (1) AC input: Confirm that the input voltage is consistent with the switching voltage. The input voltage must be between 99-121V. (2) Working environment: There should be enough space around the power supply to facilitate heat dissipation. When the internal temperature exceeds 75 °C, the power supply will stop working. When the internal temperature is lower than the over-temperature protection threshold, the power supply starts automatically. 2. Operation steps: (1) Turn on the power with a three-wire power cord. (Make sure the input voltage is correct.) (2) Press the 5 power switch. The indicator lights up and the LED is displayed. (3) Regulator source use: adjust the 10 and 11 knobs clockwise to the maximum, adjust 8, 9 to the required voltage value, connect the load to the 12 and 14 terminals (note the positive and negative polarity is correct), at this time 7 constant When the voltage indicator lights up, the power supply operates in a regulated state, that is, the voltage does not change, and the current magnitude changes with load. (4) Steady flow source use: adjust the 8 and 9 knobs clockwise to the required voltage, adjust 10, 11 to the minimum, connect the load to the 12, 14 binding posts (note the positive and negative polarity is correct), adjust clockwise 10, 11 to the required current value, at this time 6 steady current indicator lights up, the power supply works in steady current state, that is, the current does not change, and the voltage changes with the load. Packages:l 1 x main unitl 1 x User manual l 1 x Power cord ???? Welcome to YYBSHOP04 !!???? Thank you for your support! If you have any questions,please feel free to contact us!!! ??????PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.Features：Fast shipping from US WarehouseNumber of Channels/Outputs1Maximum Current Output10 AMaximum Voltage Output30 VAdjustable Power Supply TypeSwitch-Mode Power Supply (SMPS)Voltage110V US plugAdjustable voltage0-30VCurrent0-10ADisplay4 LEDAccuracy±0.1%±1 digitTypeDC Power SupplyBrandSENDERPICKMPNDoes not applyOn Nov 22, 2024 at 07:22:06 PST, seller added the following information:

Price: 53.02 USD

Location: Chino, California

End Time: 2024-12-22T15:16:19.000Z

Shipping Cost: 0 USD